Search results

PSWpower 20A sinewave model. I've had an occasional Error 06 when powering it up in the morning. Shaking the connector bundle on the controller, and wiggling the 9 pin Julet connector to the motor always cleared it. Last night, I happened to look down and see the controller registering over...

I'm told the DD magnet drag isn't so bad when you're riding, and I have test ridden some 500W DD motors bike a few years ago and they coasted OK. Maybe the controllers on those bikes kept a little current in the windings. I've read that a tiny bit of throttle lets you pedal a 1000W motor nice...

I would first like to measure 5V between the red/black on the connector coming from the controller to make sure they weren't messing things up. Then I'd get the female connector and align red-red, black-black, and white to yellow, If you can't get a matching female connector (from an ebike...

I have a bafang 750W install w/o a gear sensor. For street riding, I have no need to be shifting while accelerating, so I'm fine.

Zoom zoom then. I guess you are not really running this thing as a motor driven wheelchair?

I would think that the motor control features which allow a KT controller to do fine movements needed for a wheelchair are mainly in the controller. In the ebike world, there is a speed limit override available in the first user programmable screens on an LCD3. I bet your LCD3 is locked out to...

I've been there with the backward pedals. I flipped the magnet disk around. It worked right.

A throttle is nice, even if you don't use it, because you can power on your bike, lift the wheel, flick the throttle and you know right away if the bike is working. Part of my pre-ride check every day, Don't want to coast down the little hill leaving my place and find there's no power when I...

That is a spoke pattern I've never seen before, but I've not seen much. Must be a radial pattern.

I like how you hid the controller inside the battery! It took me three years to discover what could be done with spiral wrap. I use to throw it away, Then I became a devotee, Bought 30 feet of it for like two dollars. Cut the PAS Disk next time? I do. Yes. Wheelies. Not so much on mine...

His balance connector has 10 wires. The BMS uses the most negative side of the battery for reference. d

(I've edited my post to better match the professed electrical knowledge of the OP, although given what he has done so far in disassembly, I'm sure he could pick up this knowlege. It looks to me like the BMS is wired correct. There should have been a charge connector with its return pin wired to...

Depending on the KT controller/LCD, you might get more levels of pedal assist, with better granularity and response, except I don't know that the big direct drive motors are any fun to pedal around if they have fast windings.

If you are not buying the wheels spoked, the common practice of alternate in/out spokes doesn't work well. The in-facing spokes are bowed and don't touch at the cross like they should. I first did both wheels like this, but didn't like it. Tore them apart and respoked with all spokes facing out...

No need to bend the frame if your customer can live with one less gear. On a Q100, the OLD spacing of 135mm is determined by a bushing and nut under the freewheel. Loosen the nut, file down the bushing, and use a thinner freewheel. This pic is a Q128, but it works he same way,

I thought it was the hinge, but glad to know that I'm wrong. Is it the weld where the downtube meets the head tube, given that most folders have no top tube. Our folders. Mine is the yellow.

I see that now. A quirk of the lens which makes the front wheel look smaller also confused me. I have the Q100H 260 rpm motors (36V) on our folders. Bought bare motors from BMSbattery to save on shipping. Spoked them into 36H rims with Saphim Strong spokes which are 13G at both ends and 14G in...

Interesting bikes with 20" front and 26" rear. If I were doing a bike for someone else, it would be a rear wheel, as I don't want the responsibility of a front hub motor coming loose. At best, it only breaks all the wires. At worst, someone gets hurt. I've got a low power front hub on an alloy...

How many cells in a Tesla. 5000-7000? In a car, the cost of the 18650 cells is the major portion of the cost of goods, so as the price per cell came down, less $/KWh. You have 40 to 78 cells in an ebike battery. The cost of labor, case, connectors, and BMS is a larger component. Also, margin...

I suppose it's cold where you ride at the moment.. Keep an eye on the controller temperature when summer comes, as they like to have some airflow. A smaller battery won't have the reserve current you need to go fast, so I think you would miss your battery should you downsize.