Search results

  1. T

    Yosepower hub kits.

    Hi just read your post on the other thread, my wife and I have 2 bikes with yose kits hers is with the KT controller KT LCD3 and mine is with the LISHUI controller c500lcd like in your pics , hers is a Portuguese Berg MTB 26 and mine is a specialized 29er, we are in Azores Portugal the c500 lcd...
  2. T

    Yosepower hub kits.

    Just some feedback, a new split PAS unit has solved the problem and the bicycle is now running as it should, Thanks to Winona at Yosepower for sorting out the issue, cannot fault their customer service
  3. T

    Yosepower hub kits.

    Yes i have the one piece u it and the PAS kicks in and out , more out than in and makes the bike in PAS unusable, the throttle works ok
  4. T

    Yosepower hub kits.

    Thank you, the reason I am asking is I opened my sensor as it wasnt working right and found 6 magnets, and it says its a KT- V12L
  5. T

    Yosepower hub kits.

    Hi everyone The KT-V12 L pas sensor has it got 12 magnets or 6 magnets, does 12 signals mean it has 12 magnets?
  6. T

    Yosepower hub kits.

    Thanks for the heads up
  7. T

    Yosepower hub kits.

    Thank you for your help and info, all this is new to me, had solar on a boat years ago, now live on land, have a friend who flies quad copters who helped and put me on track with the charging ideas, still learning about ebikes and liion batteries,
  8. T

    Yosepower hub kits.

    The imax can do 6s maximum so 12s would be a solution
  9. T

    Yosepower hub kits.

    My charging system is 12v off grid and uses a solar panel, charging 2x200amp mastervolt deep cycle batteries thru a steca solarix charge controller, and an imax b6 mini charging the cells
  10. T

    Yosepower hub kits.

    I was thinking of making a 12s battery, I use a 10s4p at the moment split into 2x 5s4p packs and charge and balance using an imax b6 mini, and using lipo battery meter low voltage alarm buzzer to tell me when the voltage is low, much better than a BMS so far - the imax b6 would allow me to use...
  11. T

    Yosepower hub kits.

    I dont know the RPM of the hubs, both are yosepower hubs, both have not had any adjustments through the LCD, , both standard as shipped and received, will see if I can find any specs anywhere
  12. T

    Yosepower hub kits.

    700c its a 29er on the lishui bike and a 26 incher on the kt bike Still have the manual for the lcd 500
  13. T

    Yosepower hub kits.

    Ok just done a suspended no load speed test, this is quite good for comparison as both batteries were built by me with cells supplied by NKON, and they are almost the same age battery, my wifes bike KT controller has had 2 more charges than my bike Lishui controller otherwise both batteries are...
  14. T

    Yosepower hub kits.

    Yes have contacted yose and sent video - it is really nice to have access to both systems, will help out if I can.
  15. T

    Yosepower hub kits.

    I have a video, , i hung the bike up and pedalled forward, applied brakes manually rotated wheel backwards and the motor kicked in and ran forward for a second, could i e Its 6,7 mb
  16. T

    Yosepower hub kits.

    I have a video, , i hung the bike up and pedalled forward, applied brakes manually rotated wheel backwards and the motor kicked in and ran forward for a second, could i email it to you
  17. T

    Yosepower hub kits.

    Hi Nealh Thanks for all the info, when backwheeling - I have disc brakes that arent binding and there are no mudguards to foul, and its a MTB, so tyres dont foul - its baffling, when you pull it backwards it feels like a rubber band tightening , getting tighter the further back you pull it...
  18. T

    Yosepower hub kits.

    Thank you for the screw info, the kit is finished, going to replace the disc screws. Just a few questions on the Yose Power with Lishui controller, c500 display bike If I pedal backwards fast from a standing start the motor turns on momentarily, going forwards - not nice, as before getting on...
  19. T

    Yosepower hub kits.

    Thank you for the reply, those screws that are supplied on the latest lishui controller hub kits are not great, one hex screw didnt fit the allen key and stripped the hex socket, had to remove it with a vise grip
  20. T

    Yosepower hub kits.

    Hi can anyone help When installing the disc brake rotor on the yose hub, I take it that the plastic washer/spacer is removed and the rotor fits directly onto the aluminium of the hub? And the plastic spacer is not used? Is that correct? Thank you