Search results

Can anyone help with where I can find the connector that fits this plug and some cable please? Thank you in advance

So Nealh , the kt PAS system is current controlled and the Lishui is speed controlled?, i have been reading around and radpower have speed controlled PAS as do some sondors, anyone confirm this?

Hi , Yes apparently the harness between the controller and LCD is different.

Works ok in 4 or 5 pas, but am thinking of trying a KT CONTROLLER LCD3 AND WIRING HARNESS when I have time and money

Would be interested in that chart

, yes noticed that my wifes setup uses less battery for the same trip, though it is not scientific but more or less as she uses PAS more, and I pedal more(not using motor) and she still uses less battery so in my personal opinion I think the KT controllers are more frugal in battery use than the...

Hi Scorpio, Yes I have found that I dont like the speed settings in the Lishui controller either, especially after using my wifes KT setup, it is fine but once you try the KT setup you realise its shortcomings, I particularly dont like when pedalling in PAS 2 at the max speed in PAS 2 and change...

Maybe its the controller, it was making that noise early in the ride, we started through our village and back, 2km FLAT, in total and I stopped to adjust my wifes new saddle, she got on took off and the noise was there, then it dissappeared, on one of the previous rides the motor made that noise...

But I am sure that the connector is pushed in correct, Its up to the mark and I made doubly sure it was seated as I read about that problem early in the thread while I was waiting for the kit to arrive

Thank you vfr400, right now I am not very happy with yose power, My wifes KT kit motor I got was a season hub, probably one they did not fit to their season bikes, and it made that noise from the beginning, and they said when the motor gave problems ie intermittent cut outs it was the PAS...

Does the 17 A, 8A controller from yosepower have more mosfets?

Would a different spec controller help, this was the 36v max current15 A rated current 7A controller KT36ZWSRT-EP01, any suggestions Also this time not with bubble wrap

Hi NealH, it was going up a hill in PAS 5, we have no choice here everywhere is a hill, its the side of a volcano, heres a part of the route itsthe white windy bit with switchbacks

It is very strange because we have done the same route before and the controller never did this, , the motor was making a different noise to its normal whirring, it had an added noise like a piece of plastic rubbing on a tire, like a highet pitched scratch earlier in the ride

See pic

Running 36v and the controller has not been modded and how do I know what current Iam running? Will look under the PCB, Iit also looks like sober melted off the shunt, is there supposed to be solder on the shunt be ausrpe the shunt looks blackish and the solder looks like it has run to the left...

You can even see on the capacitor? in pic three the grey shrink film is melted,

Ok Newest saga, went for a ride today and my wifes bike just stopped giving power, thought it was maybe a flat battery or thermal overload, went home tested battery volts OK, put another battery on bike still no switch on, felt controller, not hot, then thought let me check the fuse I put...

I was thinking to do the same seperate + - triggers are much better, await others input

You could have the lishui version of the yosepower hub, the one that has integrated buttons on the lcd unit, this means that you need to buy a new KT controller, new 4 into one cable that is KT Compatible and a new lcd, if you wish to change to a KT LCD, even then I am not 100% sure it may...