Search results

Top man Nealh, thanks

I really does look great, the most stealthy hybrid/flat bar communter I've seen. Be interested in the specs (battery size, motor torque etc)..hope it has a low profile lcd too

Hi guys, just need some advice re bottom bracket size. Have taken out my existing Shimano bb-un52, it's 73 x 110mm spindle length long. I only have about 2mm clearance between the left hand crank arm and the bottom bracket shell. So in order to fit the yosepower pas sensor I need another 5 mm...

The Woosh Karoo 2108, is that now have built in frame battery and hydraulic brakes ? Your good in the photo but not easy to tell from that. Your website is still showing the old model?

Thanks all. Kit has arrived (Yosepower 350w rear wheel, 13ah battery etc) in a big box, itching to get started, but just no time until the weekend :-( Yes please, PC2017, be great to see your LCD3 settings, I'm not planning on installing the throttle, just the PAS crank sensor, will save me...

Thanks for all of the info so far :) My kits has landed int he UK, should be with me in a day or 2. Hopefully get some time at the weekend to start building it. Apart from the wheelsize and kmh/mph settings, is there anything worth changing in the KT-LCD3 setup ? I'm assuming level 6 assist is...

There's a 3% off code they send you if you sign up on the yosepower website, about a tenner discount on the motor / battery kit. I was set to order from the yosepower site until I saw the ebay code which with that made it a bit cheaper. Anyway, it's been shipped,, have ordered a torque arm too...

I've had the usual grunts, and 'that's cheating' as I whirl past the roadies uphill on the commute to work. I've replied with the usual comment 'carbon frame, skinny tyres?, that's cheating !' which is met in most cases with laughs of 'yeah, you got a point'. Caught a couple of roadies out on a...

Y Yep will do. My 1st conversion so I'll no doubt be back on here in the next week or two looking for advice Sorry, the deal's over now (just yesterday), however, keep an eye on the hotukdeals forum as it's sometimes repeated. The kit I've got is available direct on the yosepower website for...

Thanks Nealh, great advice, will get one, less than a tenner for piece of mind

Cheers, like you I think will go with the standard bottle mounts intially, and if i start doing some off road stuff will add some extra mounts Cheers

lyme, can I ask if the 2 bottle cage holes were sufficient for the battery (assuming you used a downtube one) or did you have to drill extra holes and install rivnuts?

Thanks lyme, that's really helpful info, cheers

Thanks Nealh, great advice. A quick look on ebay shows torque ares in verious sizes, 12m, 14mm etc, any idea of what size the yosepower wheel uses? If I get a longer BB, will the chain line be out on the right hand side, and hence will it rub the front derailleur or not change gears well ?

Hi guys About to dip my toe into the world of conversions, excited as I have just ordered the yosepower rear hub 26" kit with battery for £308 from ebay (...

Thanks for the hard work you putting in anon4. If you ever crack this, you'll be receiving a crate of ale from me and I'm sure a few other crossfire-e / vulcan-e owners. Good luck!!

I'd be happy with that

What we need is a inline din style connector with the white pin left unconnected save having to cut any wires, would work as a test. Anyone with this bike have any electronics skills to do this?

The vengeance uses a bafang system, the Crossfire and vulcan use the suntour system. Why are they being compared they don't share any parts ?

Yep, the odd cutout is par for the course with these vulcan and crossfires, no biggie. Good to hear the Vulcan likes the off road stuff...I'm always impressed with this video