Search results

I'm wondering if you un-short the two wires,and put them back where they go it might run properly.

I suppose the trade body"s where happy with the no throttle,because it hides the battery range.If you gave the people mopeds that they can ride with no helmets/reg they would be in moped heaven.

Well they say mid-drives eat your chain and sprockets.I did this to a cheap MTB chain set. No electric just pulling away from a standstill in top gear.Don't do it folks.

So does this make all homebuilt/kit bikes illegal ? Do the ones built before April 2015 have grandfather rights ?

Mig with gas around £180,Can't see a cheaper one,if you could find one about £140 with a free bottle of gas and a reel of non gas wire and a reel of gas wire..don't forget a grinder with thin cutting discs and sanding discs.

Ecosmo 20" folding tandam.£299 on eBay.

Mig with gas.you can buy different wire and gas for alumium.none are cheap.I would not try to weld in a flat.lots of practice on scrap before welding something you want.watch some videos on welding.

The first is a gas less mig.a mig with gas would be better.The second one is a arc welder,which is cheaper to run(you only buy the rods,gasless mig wire is expensive.and a mig with gas you need wire and gas.)A mig is easier to use for a beginner. It is hard to weld thin steel with a arc welder.

just found this bomber copy.

Mirror Mirror on the ebike,what do you need to be to pass the M.S.V.A.I need to be fitted to the offside.I need to be convex and in a protective housing with a radius of 2.5 mm.I need to be not less than 94 mm wide and not more than 150mm.When I'am not circular I must be able to contain a 78 mm...

Reduced to £375 on eBay.

Not sure,but are these packs used in hospitals as back up and once past there use buy date they won't use them.

For motorcycles with retreads then goes on about them so I think you need them for the msva.Sorry for any confussion .

Just reading the M.S.V.A manual again.Fist item is E marks.I skim past it every time.I see the word E mark and think back to when I took an off road bike in for its M.O.T.The tester said nice tyres but it doesn't matter what they look like.They must have a E mark.But the manual does say no e mark.

My camper van has 8 ply tyres.Its the number of strips of rubber used in the construction.I read about them on the 19 " motorbike wheel thread on es.That has info on conversion washers for using bicycle spokes with motorcycle wheel rims.

Motorcycle wheel and tyres are a different size to bicycles.A 19" motor bike tyre is near enough the same height as a 26",they will not go on each others rims though.I'am not sure if its all (see endless sphere fourum)16" motorcycle tyres fit all some/all 20" bicycle wheels.If you can find a 2...

You seem to be able to buy lightweight ones with just what looks like emergency stop buttons. .If a electric bike was made to be a lawn mower would that be road legal ?

You had me racking my brains where I had seen the post office ones.Rhyl train station.

I can't see any limit on speed.as fast as you can run ? Bald tyres? Any power?lights ? Reflectors?skateboard?

That's nearly the weight of a reliant robin 450 kg.