Search results

P07 is how many magnets are used to give a speed signal. If you have a direct drive motor, there is no speed sensor in it, so P07 is the number of magnets in the rotor. If you have a geared hub-motor, the number of magnets is 1 or 6. You can tell which of the two by the displayed speed. If...

Google tracks you everywhere you go if you have it installed on your phone. You can see where you've been by looking at your Google timeline. You can go back many years to see where you were at any particular time. I hope you haven't been anywhere you shouldn't, and don't leave your phone lying...

First thing is to check the back side of the battery connector on the controller side to see how many wires are attached. If it's two wires, you can replace the controller with any one you want and a suitable pedal sensor and/or throttle. You'll probably need to solder all 9 motor wires to the...

If all the possibilities above have been eliminated, the logical cause is the speed sensor or the P07 setting in the LCD. The P07 setting tells the controller how many pulses from the speed sensor per revolution. If there's a problem with the speed sensor, the controller will calculate the speed...

You need to get your facts right, my friend. The poster was the front of about 8 slides published on the WEF website as part of a their presentation about how the Great Reset would affect us. It went viral pretty quickly on social media, which was probably it's purpose, then it was removed soon...

In case you don't know, you can do your own conveyancing as long as you're not taking out a mortgage. I've done that when I bought a house from the council via an auction. The only thing that you have to look out for is that yo'ure obliged to do the land registry stuff within quite a tight...

That's complete ball cocks. It looks like misdirection to me. The Great Reset and their infamous poster " You'll own nothing and be happy" waere around long before covid. Here's the BBC talking about it in 2011. Don't forget that the BBC will try to make it sound sort of warm and cosy rather...

That looks like a brushed motor controller. Unlike our brushless ones, brushed motors don't like giving much extra power. You can use any 36v brushed motor controller you want, but it might not make it go any faster. Lift the wheel off the ground and see what speed it spins up to. If it's still...

The Great Reset is coming!! You lot thought it was a conspiracy theory.

I can make sense of it now. The flat on the washer is to clear the screw that holds the derailleur on. It's difficult to see from the photo because of the angle. One from the side would have been better. It looks like the flat on the washer doesn't go far enough and when the axle is far enough...

You can reach over 100 mph if you ride it over Beachy Head. Seriously though, you can make ant bike faster. There is no simple button to press that'll make it go faster. It's just a question of what you have to do. Your bike has a lot of non-standard stuff, so it's not as easy to swap parts as...

M14 is the axle thread. Nearly all geared hub-motors have M12 threads. In spite of that, if you find the listing for the correct M12 set, they should be the same as what you already have except you should might have the other type of anti-rotation washers.

There are no cable converters and none are necessary. Just solder the wires if the connectors don't match. It takes about 5 minutes - less time than ordering anything. You can get KT controllers from Topbikekit or various Amazon and Ebay sellers. You can get them either with block connectors...

It's a standard Bafang hub-motor. Even if it wasn't, it makes no difference. All hub-motors work the same. You can use any controller you want that's the same size. We always recommend KT controllers because they have much better control functions and there are lots of different LCD options. The...

He's a dealer of EVs and an owner of one. He's just expressing his frustration on how EVs are affecting the market and his business. As you probably know, I have a close assosiation with a fairly large local automobile business. They're saying the same as that guy. Ask any car dealer that speaks...

I can't say definitely all, but it's at least most of the commercial installations have a washer under the nut. I can't say which would be best between the nut with and without the washer. I can see merit on both sides.

On most bikes, the washer prevents the wheel from being removed because it can't slide past the derailleur fixing point, in which case you have to remove the nut and washer completely from the axle before you can slide the wheel out, which is a nuicance. Grinding a flat on the washer would solve...

It's not looking good for Kamala. Even Obama and Biden can see it: https://x.com/RubinReport/status/1846701118920741157

In case you don't know, you need countersunk screws, and you're missing at least one disc screw.

Interesting insight in how a dealer and owner sees EV's here: