Search results

All the electrical parts are standard. You can use just about any ebike motor you want without modification. The motor is the one thing that's plug-and-play accross different types. All the other electrical parts can be swapped for alternatives. You don't have to use Oxygen ones because they...

All this is probably related to Project Blueray, where some group of world leaders and others hatched a plot to fake an an alien invasion so that they could form a world government and seize power from democracies. The project has been largely made moot by the opportunity to use covid for the...

Read this carefully. Somebody knew enough to pay £1.5 mil to find out about the expected high number of adverse covid-19 drug reactions: https://ted.europa.eu/udl?uri=TED:NOTICE:506291-2020:TEXT:EN:HTML&src=0

Aldi snowboarding helmets cost about a tenner and offer much more protection than whatever you bought.

Use a mosfet switch as a much better solution all-round.

The water wasn't in the motor to make it noisy. Instead, it was in the connector. Running your motor when it doesn't run properly often results in a blown controller. Be careful!

There are three commn causes: 1. The magnet disc behind the chainwheel has been knocked out of line. The gap should be an even 1mm to the sensor. Wiggle it back into position if it's drifted away or crooked. 2. A magnet has dropped out of the magnet disc, in which case there will be a hole where...

What you make is only dependent on your imagination. If you can't think what to make, it's probably not going to be much use to you. I have two printed parts on my bikes. I have a robust bracket for my rear light because the brackets on the cheap lights I buy always broke when I tried to replace...

What's wrong with your Oxygen? It has all standard parts, so is easily repairable for everything but a broken frame. Where do you live? It is possible to fit a throttle to your bike, but it requires a special cable and (i believe) a special throttle, which I have seen on Aliexpress a while...

Some ineresting stuff coming out of the whistlebower organisation Project Veritas. The woman shows her actual health service ID and the footage looks pretty authentic to me. It's just one whistleblower in one location, but the info is worth keeping at the back of your mind. It says pt1, so...

It's very simple. The LCD works completely independently from the rest of the bike. It's connected directly to the battery. When it goes off, there are three reasons I can think of: 1. The battery supply has been interrupted. You can confirm that by monitoring the voltage on its connector with...

Do you know that you have to add the shipping cost to the BMSBattery items, and that you will have to pay around £40 duty? That battery will be close to £300 altogether. BMSBattery is good to get the right kit, but not cheap when you do. Yosepower batteries on Ebay are cheaper and probably just...

If it were my bike, I'd swap the controller and LCD for KTsinewave controller and LCD3, which is a much easier to use control system than those C600Es. The C600Es have three levels of power, but you have to pre-select the one you want (eco, normal, power) before you set off. It can be done...

It's not worth repairing. You could probably buy a new lithium battery drill from Aldi or Lidl for less than the pice of what you need to repair that one. https://www.ebay.co.uk/itm/224237874078?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338364431&customid=224237874078_11700&toolid=11000

Cwah isn't a big guy. As far as ebikes are concerned, he doesn't need as much power as most of us.

Sealants, like slime are for tubeless tyres. You should never use it with tubes, I've been telling you that for years..

I'm pretty sure that all Bigstone LCDs have the same protocols. The only thing with this one is that it has the three power levels as well as the 6 PAS levels. The C500 has that too. These LCDs are used on several bikes, but some (those with Das Kit electrics, like NCM) have reversed connectors...

What about configuring everything to run off Hobbyking lipos? As soon as you get off the plane, you can order some. You get them very quickly and they don't cost muxh. If you have to get another plane, chuck them and buy some more.

Oxygen are in Rotherham. They used the same display on some of their bikes. If you ask nicely and can get your bike there, they might let you try one of theirs if they have one. A C500 might also work, but you'd have to try it. They might still have one of those from earlier bikes.

No need for any special piggy back connector - just splice the wires inside the controller if you have the moulded connector, otherwise splice just outside the controller where the wires are exposed. When you get a speed sensor, let us know which type for exact instructions how to fit it. You...