Search results

not you, i just want to answer jackhandy about otg approach ! only support iphone 4s onward because bluetooth version 4, or low energy bluetooth. apple blocked its bluetooth on iphone 4 3GS from connecting, unless you share profit with them :(

tell you more old_dave ... if we have combo version, iphone and android, however iphone doesn't support OTG !

"bigger picture" ... you are so clever old_dave, imagine your speed controller installed on your bike and you need firmware upgrade, how ? and think about rainproof speedict mercury ? we are improving the handshaking on firmware upgrade, at the end it will bulletproof, i was told by users...

alternation ? do you want virtual 3 speed ?

i think jackhandy would like to install 3 speed switch on throttle out, e.g. throttle out voltage 5v when switch on with resistor it will then change to 4v, but i don't think it gonna work because speedict has feedback system e.g. if speed throttle mode is selected and set speed value is 25km...

firmware 1.0.1 is released, please update android client 1.0.4 to safeguard firmware upgrade.

hi guy, 1.0.4 is now available, please update it first, and later we will also release or unlock the firmware 1.0.1 for upgrade. once again please use android client 1.0.4 to safeguard the firmware upgrade !

hi guys, these days we have received some bluetooth connection issues and we have launched different version of android clients to tackle it, because we don't have such rom version we weren't able to test in-house, therefore after feedback information we have received, we now have android...

wurly, can you send me your port status ? as per my understanding, your throttle mode seem working ok. and when you power off the entire system (include your speed controller) and switch it back on, the moment you power on and "IF" speedict mercury's lowest throttle point is set incorrect...

new firmware is ready, will launch tomorrow, thank you d8veh !

hi jackhandy, i have engineers with me now and they are inspecting all the port status reports we have during holiday, from the first one you connect pas with zero port 4 out, we may have software problem ... please wait a moment !

hey ! time is money :) so please don't touch any parameter, and go directly to throttle mode and skip all settings, let me see if our default value is correct !

thank you so much !

hey, can you post your rom detail here such as samsung GT-I9100T 4.0.3 DVLP4 IML74K.DVLP4 DELL129

Samsung S2 bluetooth issue we have received samsung S2 with bluetooth issues, by google "samsung s2 4.0.4 bluetooth problem" we have found some information regarding it. Bluetooth problem since 4.0.4 update - Vodafone eForum Bluetooth disconnects then reconnects since 4.0.4 - Vodafone...

also be careful when select road legal 2 mode because i have seen you entered pas sensor magnet to 1, normally should have 5 magnet on pas sensor disc, and also entered 1 cadence rpm = 100% power ... if incorrect set this number will cause speed problem as well ! anyway take your time, happy...

hi wurly, the throttle response act normal because you set the throttle type to Speed Throttle (ThrottleMode = 1 in port status tell me) Speed Throttle Top Speed set to 25.2km (ThrottleSpeedValue = 252) that's mean you top speed will be governed to 25.2km when full throttle is apply...

hi wurly, do you mind i share your port status report here and answer your throttle response question ?

the logic behind bluetooth status is : when bluetooth is on before speedict app is run, when speedict app exit, it will keep bluetooth on when bluetooth is off before speedict app is run, when speedict app exit, it will close bluetooth ... jackhandy, we will turn off your bluetooth and...

sent and according to hong kong post information the estimated arrival time is 3-Jan 2013, will pm the tracking number to you.