Forgot about this post sorry - is there a battery inside the LCD3? and if so would removing that restore the original FD settings and wipe any third part programming?EM customisation to the customer so software/programming
Give it a go, it's deff. worth the experience. I havn't quite mastered the whole process yet, but I do the spoke calculation, lace up the wheel and give it to a wheel builder in LBS to do the truing for £15. I find this spoke calc. really useful as it explains each measurement. 2 cross pattern is good for hub motors.I've never built a wheel
No there isn't.Forgot about this post sorry - is there a battery inside the LCD3? and if so would removing that restore the original FD settings and wipe any third part programming?
You should start a new thread about your 1kw D/D hub issues and not on this thread which is about a different type of hub motor/kit.Hi, I’m a newbie to Pedelecs and to ebikes in general, so excuse the stupid questions. I’m building an electric drift bike (picture attached) with my kids, just for fun. We’ve bought a 1000w 48v hub motor kit. It’s from DongDian ebike kits (via eBay), but I’m struggling to get it to work. The instructions are pretty poor. Any suggestions on how I progress? Or anyone have a wiring diagram? All help would be welcomed!!! Thanks in advanced!
AcknowledgedYou should start a new thread about your 1kw D/D hub issues and not on this thread which is about a different type of hub motor/kit.
Yep you wait I'll be the one that has my battery internal combust as my motor starts flaming from the sides when I reach 20mph going down hill!48v oh you naughty boy
Make sure you get some good photos to share if that happens.Yep you wait I'll be the one that has my battery internal combust as my motor starts flaming from the sides when I reach 20mph going down hill!
I'l pop me gopro on every time i got just in case lolgood photos
You might have long wait or a flat Gopro.I'l pop me gopro on every time i got just in case lol
Too true I have a USB charge cable from battery to the cam with a side hole in my case after some git cut me up, swore at me because it was my fault for just being a cyclist and my cam ran flat 2 mins before it happened lolflat Gopro
Hi Scott - yer I spotted that info after I had posted the question lolNo need to worry about BMS it is 30a max