spd shoes

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
i think the lack of normal looking spd shoes is shocking tbh not much to look at at all.

we need ebike shoes pmsl nike air ti with clips will do ;)
 

argoose

Pedelecer
Sep 24, 2017
247
113
south wales
I don't mind the look of the 5/10's or the shimano am5's.
There are a few skate style shoes out there.
The biggest problem is that they have to have very stiff soles to be able to release the bindings, this is why they are like clown shoes to walk in. If you had a soft sole to walk in they wouldn't release well, leading to car park wobble and topple
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
DSC_0017.JPG
there 47g less than my old ones:rolleyes: and they sent me a magazine and some leaflets all in german lol
 
Last edited:

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
waiting for the shoes and crank arms ;)
 

vandalbulldog

Pedelecer
Aug 23, 2017
70
18
49
Bingley
What's the difference between xt and xc (as I have xc and they look very similar to xt!!)...

Sent from my SM-A510F using Tapatalk
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
right got the shoes today but there are no holes as it is covered with rubber?

do i have to remove this or got the wrong ones ?
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
DSC_0018.JPG
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
DSC_0019.JPG
bloody mission that was as had to cut and dig out the middle bit never said that in the manual lol.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536

Gubbins

Esteemed Pedelecer

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
i got the dot on the right so 15 degree release other way round is 20.
 

EddiePJ

Esteemed Pedelecer
Jul 7, 2013
4,632
4,013
Crowborough, East Sussex
www.facebook.com
One further thing for you to check, is to fit the pedals to the bike, clip in whilst balancing against something, and pedal backwards to make sure that you have adequate clearance between your shoes/leg against the pedal crank. It will save potentially rubbing the finish from the pedal cranks.

 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536
One further thing for you to check, is to fit the pedals to the bike, clip in whilst balancing against something, and pedal backwards to make sure that you have adequate clearance between your shoes/leg against the pedal crank. It will save potentially rubbing the finish from the pedal cranks.

not going to try them till i get my new cranks as will just use them on those but site says in stock but there not and on back order and got to ring next week now pff.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,998
6,536

Related Articles

Advertisers