Brexit, for once some facts.

flecc

Member
Oct 25, 2006
53,203
30,604
Eskimos had over two hundred different words for snow, without which their conversation would probably have got very monotonous. So they would distinguish between thin snow and thick snow, light snow and heavy snow, sludgy snow, brittle snow, snow that came in flurries, snow that came in drifts, snow that came in on the bottom of your neighbor’s boots all over your nice clean igloo floor, the snows of winter, the snows of spring, the snows you remember from your childhood that were so much better than any of your modern snow, fine snow, feathery snow, hill snow, valley snow, snow that falls in the morning, snow that falls at night, snow that falls all of a sudden just when you were going out fishing, and snow that despite all your efforts to train them, the huskies have pissed on.
But it took Network Rail to find yet another type.
.
 

Zlatan

Esteemed Pedelecer
Nov 26, 2016
8,086
4,290
Is that another statement of your imminent departure from this thread?

Last time, you didn't stay away very long.....well, not long enough for me anyway!

Tom
Tom
You have called Tories scum, leavers idiots,Tillsin, myself and Woosh racists ( and myself a troll ) and alikekened the Queen to Myra Hindley. Your replies to Woosh and Peterl have been disgusting. . You are a great advert for leaving.

And by the way where does your aggresive , vindictive attitude leave your opinions of Tony Benn..a eurosceptic and socialist...Was he an idiot ??? Or perhaps Cameron is your hero ??

Just tone it down for goodness sake Tom.
 
Last edited:
  • Disagree
Reactions: robdon

flecc

Member
Oct 25, 2006
53,203
30,604
Tom
You have called Tories scum, leavers idiots,Tillsin, myself and Woosh racists ( and myself a troll ) and alikekened the Queen to Myra Hindley. Your replies to Woosh and Peterl have been disgusting. Why dont you do remain a favour and stop posting. You are a great advert for leaving.
Now then Zlatan, all's fair in love and war, and this thread sure is all out warfare! :eek:
.
 
  • Agree
  • Informative
Reactions: robdon and Zlatan

Zlatan

Esteemed Pedelecer
Nov 26, 2016
8,086
4,290
Now then Zlatan, all's fair in love and war, and this thread sure is all out warfare! :eek:
.
Lets hope not flecc. We should be able to express opinions without resorting to war ??? I really think Tom would take up arms against leavers,...and Tories...and Royalists...and Trolls...but fair point...
( I,ve edited post)
 
Last edited:

shemozzle999

Esteemed Pedelecer
Sep 28, 2009
2,826
686
Just a little reminder what the EU has always been about


So please, please no more corny arguments that we didn't know what we were getting into.
If you personally didn't know, then as the saying goes
"You should have gone to Specsavers"
You left out - Initially press ganged by Heath then lied to by Wilson.
 
  • Dislike
Reactions: robdon

flecc

Member
Oct 25, 2006
53,203
30,604
You left out - Initially press ganged by Heath then lied to by Wilson.
Agreed, I've made exactly this point, but it didn't stop me knowing that what I voted for was for increasing union. As much as the politicians, the public were the problem through not taking any interest beyond their own little sphere. Surely even back then we knew that politicians routinely lie to get their own way, so what they say needs checking?
.
 
  • Agree
Reactions: oldtom and robdon

Danidl

Esteemed Pedelecer
Sep 29, 2016
8,611
12,256
73
Ireland
Daniel
Exactly right and why cant we use both systems when appropriate? Yes, obviously SI is easier for engineering ( but we didn't do badly with Whitworth/ AF etc)
Making people buy in undesired units is wrong.

Why is it some remainers ( not flecc/ Daniel) have taken brexit as an excuse to be so vindictive ? Perhaps Tom would like to offer his excuse ?
My spell check corrects to Daniel. ( sorry)
Don't worry about the Daniel bit... It is actually correct... My keyboard stuttered when I was enrolling. At my stage in life, I am all in favour of European standards, and so would you if you tried to do plumbing on old houses. There is a slight but important difference in the thickness of copper tubing and their olives ....( I much prefer to use compression fittings) for piping purchased in Ireland, in England .. including NI and France. ..and maybe different also in other countries. The wrong combinations will leak.

I am constantly reminded of the mars spacecraft which deployed it's chute 1 metre underground, because of a mismatch between subcontractors working in Imperial or US measurements and others in metric.
I won't speculate as to why people trade insults... Though in fairness you yourself are not behind the door. My tendency, with few exceptions is to play the ball not the man...
 

oldgroaner

Esteemed Pedelecer
Nov 15, 2015
23,461
32,613
80
You're so lacking in discernible prick tendencies, you're actually a prick because it. Either a lying prick, or so annoying nice, it makes you an annoying prick. Sort your life out.

Fairly sure that a few more weeks on here will sort me out.
Don't for goodness sake change, that would reduce your entertainment value!

Sent from my XT1032 using Tapatalk
 

shemozzle999

Esteemed Pedelecer
Sep 28, 2009
2,826
686
Agreed, I've made exactly this point, but it didn't stop me knowing that what I voted for was for increasing union. As much as the politicians, the public were the problem through not taking any interest beyond their own little sphere. Surely even back then we knew that politicians routinely lie to get their own way, so what they say needs checking?
.
But we have eventually reached the final point, after being denied by politicians a voice on previous Treaty changes, of being unable to fool all of the people all of the time and the people have spoken - we are leaving the EU.
 

Zlatan

Esteemed Pedelecer
Nov 26, 2016
8,086
4,290
Don't worry about the Daniel bit... It is actually correct... My keyboard stuttered when I was enrolling. At my stage in life, I am all in favour of European standards, and so would you if you tried to do plumbing on old houses. There is a slight but important difference in the thickness of copper tubing and their olives ....( I much prefer to use compression fittings) for piping purchased in Ireland, in England .. including NI and France. ..and maybe different also in other countries. The wrong combinations will leak.

I am constantly reminded of the mars spacecraft which deployed it's chute 1 metre underground, because of a mismatch between subcontractors working in Imperial or US measurements and others in metric.
I won't speculate as to why people trade insults... Though in fairness you yourself are not behind the door. My tendency, with few exceptions is to play the ball not the man...
I now prefer push fit...O rings etc...Done well they last for years, never leak and sections can be removed , without spanners and stressing pipes...no problems going copper to plastic...you must use the little aluminium inserts tho... Plumbers hate the stuff...its putting them out of business...
I,m still searching for my half inch metric spanner...

Actually having a few problems with an American foil system I,ve just bought...Head is tapped to accept what looks like m6 bolts...but they aren,t...some American thread...had to buy bolts from states.... American Gallons are quite an anomaly too...where on earth did they come from...???
 
Last edited:

flecc

Member
Oct 25, 2006
53,203
30,604
American Gallons are quite an anomaly too...where on earth did they come from...???
Both gallons had their origin in the Winchester bushel centuries ago, but that was refined independently by both lands. The end result is that the US gallon is some 20% smaller than ours and they have different numbers of fluid ounces. Both have 32 gills per gallon, but the US gallon has 4 fluid ounces per gill, the Imperial gallon 5 fluid ounces per gill.
.
 
  • Like
  • Informative
Reactions: robdon and Zlatan

Danidl

Esteemed Pedelecer
Sep 29, 2016
8,611
12,256
73
Ireland
I now prefer push fit...O rings etc...Done well they last for years, never leak and sections can be removed , without spanners and stressing pipes...no problems going copper to plastic...you must use the little aluminium inserts tho... Plumbers hate the stuff...its putting them out of business...
I,m still searching for my half inch metric spanner...

Actually having a few problems with an American foil system I,ve just bought...Head is tapped to accept what looks like m6 bolts...but they aren,t...some American thread...had to buy bolts from states.... American Gallons are quite an anomaly too...where on earth did they come from...???
Leaks neither does the all copper system provided the matching pipes and olives are used. They are more to
Tolerant of the external fitting so one can easily buy 1/2 inch couplers and bends in France which mate happily with irish or .uk fittings ...provided the olives and pipes are correct.. . Reading this it sounds smutty....
I gave used the modern aluminium composite piping system on one circuit. It works fine provided good fittings are used... tends to work out more expensive. Piping cheaper fittings more expensive.. so only better when there are long runs of tubing.
 
  • Agree
Reactions: robdon

Advertisers