Search results

I use this ebay item and fitted it into a project box and attached to handlebars with a couple of cable ties. Works very well and cheap as chips. http://www.ebay.co.uk/itm/3-1-2-BLUE-DC-50V-LCD-Digital-Volt-Panel-Meter-Voltmeter-Voltage-/221029267823?pt=UK_Gadgets&hash=item33765ef96f#ht_3089wt_950

I use 30 amp connectors and a nail to crimp them then solder them. Link below to show you how. …crimping Anderson Power Pole connectors… « WH7DA

If you can change the colour of a car or van by "wrapping " it then surely this could be used on our ebikes. You could have a different colour every week. matt black, carbon fibre, white,chrome and pearlescent car wrapping - colour change car wrap -

Sorry Lynda but I am with flecc on this one..........Tartan is a winner!

I would say WHITE is definitely making a comeback.

I will also say thanks to d8veh for the advice he has have given me in the past, I too hope he will rise above this recent unpleasantness and return to the fold asap. If you are looking in d8veh I for one will miss your assistance. I would not be riding the wonderful bike I have today if it was...

We are on Maragowan Caravan Club Site. It is right next to a river with clear slow flowing water about 10 feet behind our caravan pitch. Lovely small village with nice pubs and of course the Falls of Dochart.

This is the view from the trail looking down on Lochearnhead.

Got the week off so we are at Killin Stirlingshire with the caravan. Been out today on the Rob Roy Trail. A disused railway line from Killin to Balquhidder. Fabulous views and a very gentle trail for the most but it does have some real steep bits. Did 30 miles today with loads of battery left...

I don't think it is a simple case of just getting it registered. It would probably have to be SVA tested like kit cars and imports do before they can go on the road. They need a model report which I believe is a lengthy expensive process. Far simpler to just buy a moped.

I purchased both my Bafang kits from a forum member Alan (Catsnapper). He supplied both motors already laced and came with controllers, throttles, pedelec sensor etc. Excellent service and value. Hope this helps

I use Sram chains. Comes with powerlink. Makes joining the chain simples! SRAM Powerlink Connector | Buy Online | ChainReactionCycles.com

Totally agree with ed_wanna_ebike. Bicycles were always meant to be rear wheel drive and this is very much my preference. Also a motor on the rear and hidden battery and controller in a pannier bag on a rear carrier is very stealthy. I does put most of the weight on the back axle but is not...

I have two kits with BPM 350w motors and KU120 controllers. For me and the Mrs. I had catsnapper supply the kits as in my opinion his wheel building is far superior to anything from BMS Battery. I would just order the motor, controller etc and ask Alan (Catsnapper) to build the wheel. Done...

Offer of $15 au accepted for two volt meters. Result!

So if I ordered this volt meter at what volts would I expect my ping 20ah battery to cut out?

Must have been pretty close to your mate too. That's nearly two donor's then. Glad you are both okay.

I put the IP address in my browser and got the same message. Must be my firewall or something, but I do not normally have a problem entering websites. Oops! Google Chrome could not connect to 69.175.104.178 Suggestions: Access a cached copy of 69.*175.*104.*178 Try reloading: 69.*175.*104.*178...

Sorry guy's I got this message: Oops! Google Chrome could not connect to CycleCharge - The UK's E-Bike Battery Charging Scheme Did you mean: www.*cyclecharge.*org.*uk Additional suggestions: Go to www.*cyclecharged.*com Go to www.*cyclecharger.*com Try reloading: www.*cyclecharge.*co.*uk...

I have tried to get in to the site with Internet explorer and got this message : Oops! Internet Explorer could not connect to CycleCharge - The UK's E-Bike Battery Charging Scheme Try reloading: www.*cyclecharge.*org.*uk Additional suggestions: Access a cached copy of...