Search results

This is the connector from the controller to PAS connector, and it is Julet so I would have to 1st check where i buy one to make sure it has Julet on it. as I dont really want to cut and solder wires again if possible.

Oh yeah I had forgot that So what two piece PAS is best to get which will work on my crank

I would imagine the connector is Julet. As most of my connections are like that orange. But saying that I had a problem with my thumb throttle connector as that was orange, But was wired different way, and dont think the new thumb throttle had Julet marked on it. so I had to cut off the...

Well no when pedalling, the PAS dont kick in, so I can replace for same one what I have now, if it dont go after cleaning. whats a 2 piece PAS The connector of the PAS is same as I have with thumb throttle connector whats about what I said here I see I have 12 magnets on the...

Oh I didnt realise you could pry it apart, so can now try that. and yes it will rotate he inner part, when you turn pedals. I just thought maybe a better PAS would be better, but not sure which type. I am a bit confused though about PAS, as on the display, if I have no PAS marks showing, then...

Is it possible to fit a better PAS then if so what type. I really need some help on whats best one to get for my bike. as looking at the magnets on old one they do seem to be broke or worn

Well I am stuck now until I can remove the pedal arm to access the PAS sensor as dam just cannot find that crank puller https://www.ebay.co.uk/itm/193210138461 Well after 1 and a 1/2 hours looking for that pedal arm remover tool Ive got the arm off and here is the sensor but what do I look...

No I dont feel the PAS kick in when I pedal without throttle. so it most likely is the sensor at pedals. I am going to check bike when its a bad day like the weather I mean, but while this nice weather is out, im going out each day on bike. so not had a chance to look just yet but will try...

You say above my throttle should be zero start, well it is zero start as its on 000.00 P09 Zero start & Non-zero Start. 0 is Zero Start, 1 is Non-zero Start Ive got a bit confused with this PAS, as if I turn it off like no markers on display, then my throttle dont work. but obvious it...

ok will check that too. But you need a special crank nut to remove the pedal arm I’ve got one somewhere can think of the name of it now

Yeah true what you said. I’m firstly going to put it back to factory settings hopefully that may sort it. I will 1st make sure I have taken images of all 16 programs then start again I can’t really see what could be wrong at pedals as the PAS wire is ok and can’t see how the sensor can come off

Well Yes I heard also that shops can sell bikes with a throttle, but its ilegal to use one which dont make a lot of sense if shops can sell them. and its ok for them. so is my P14 on the right setting to hill climb, as like you said its 20a so it must be on highest setting now I will check...

so is it better to have it start with pedal 1st then

so mine is a zero start then yeah.

I cannot recal making any changes in settings, but will check them here are most Programs, some are not showing anything, some are faded but can just see them

when you say Yes P10 is set on 2, but I dont need to pedal to make throttle work, as I can just go off from o on throttle no need to pedal I think it shows 000.12 on P13 I was given this info from someone on here ages back now, and right at the very bottom it says if I need more...

When you say does it go, when i use throttle IE: Pedal asssist. I cant say as obvious when I use the throttle, I dont need to pedal. But like i have said if I try to pedal at same time as Im on throttle, yes its easier then on pedals, as I am on throttle. hope that explains it ok

How do you mean with throttle, as if i use throttle which works fine, I dont need to pedal, But if i do pedal when on throttle, yes it seems easy. whats walk assist for, as never used or know how to use that

Oh I see never knew that, anyway I will have to check the sensor, next week sometime. I believe you need some sort of tool to remove pedal arm, Im sure i have one of those somewhere. cant think what its called now