Search results

Ok thanks for that, have taken note. so whats lowest voltage you would start charging up as most of my trips are only 4 miles in total its a 36V battery so obviously it is 42V fully charged

Hi I have a 36V lithuim Battery and to be fully charged it has to go up to about 42V, I tend to keep charging it up after every trip, like today I checked voltage and it says 39V so only used 3V is it right or wrong to keep charging after every trip. even a small journey

Yes well said, its all about competition these days, same with shops tesco, aldi, lidl etc etc, it seems I am going to have to solder the 3 wires, but will see when throttle arrives. I do appreciate your help Nealth, as you helped me loads on that Erider Electric Moped, plus a lot of others...

Well all I know is they are yellow with 3 pins, But it seems like you said, I am going to have to join the wires to work it. But until throttle arrives, I will wait. Yes its a cheap bike but it was all i could afford, I just needed a bike to get me from A to B not bothered how cheap it is.

Yes it seems thats what I will have to do. I just wanted to see 1st if that other Thumb Throttle will work, if not then its like you said solder the wires up, as its not as if I need to keep unplugging them. I will take a closer look at controller, when I try things, But I have to lift bike...

Well all I know is the cable is female which goes to the controller and has that yellow connector on the end and from throttle is same but male. I don’t really know what controller it is until I check it out. I know the display is a G51

I think mine then are the Higo connections.

Yes I could also have dont that, but like i said above Ive now orderd a male to male lead see how it all go if not then cut wires and solder plus heatshrink them

Well yes I was considering doing that, But now have ordered this male to male lead below, as at controlller its female and at thumb throttle its also female

Dam I am so mad now as I have just noticed this 2nd thumb throttle is female, but i need a male pins one as connection at bike is female too, can you get a male to male extension lead, or is that not going to make throttle work

Well That looks same as 2nd one i have ordered, also I had same thumb throttle on a electric moped ERider I had and sold and I quite liked that type of throttle, so hope it will work on bike

Are Well I had an idea this thumb throttle wouldnt work, its this one below I plugged it in and got a E 08 Error https://ibb.co/GC0kzDx https://www.ebay.co.uk/itm/314541101193 So its a good job I ordered another type just in case, just hope now this 2nd one will work...

Yeah tight as a virgin LOL I will try again, Im still waiting for thumb throttle and handlebar grips, so I may do them all at once, as no point in fitting mirror, until Ive taken off grip throttle and replaced with normal grips and thumb throttle

Yeah maybe its best to keep it upright then. anyway What a plonker I am as I got my zefal mirror arrive today, I was in the city so collected it from a shop. thought I would fix it to the bike whilst out, But no way would it slot onto handle bar end too big. here is a image of what I measured...

Thats an idea, never thought about doing that, I ill try it both ways see whats best for me

Yeah that’s true didn’t realise that. As the thumb one is narrow so should be all good. Be glad when the zefal mirror arrives then at last can take off this useless right mirror

I have just ordered this set as you can just cut end off easy enough, Plus there is lines in grip so I may need to cut off 1 section at lines, so it fits flush to end including thumb throttle...

Ok Just ordered one, hope it is same as my grip throttle connections looks same. can you also buy handlebar grips with the end off, as I now need to remove grip throttle, which needs a grip now with no end to slot the zefal mirror in handle bar end

Whats easier a grip throttle or a Thumb one I do prefer a thumb one, will see about getting one later, Just wanted peoples opinions here whats best. would it make any difference to the speed of the bike, as Im sure its same

ok many thanks for that most appreciated