Search results

Well I like to have 26 to 28KM/h so will keep charging it after every use. As like I said earlier 22 to 23 KM/h. Is ok but a bit slow for me yes it’s took 4 months in all so I’m grateful to you and MatthewSlack as I was totally clueless about this moped but learnt loads now

26 to 28KM/h is fast enough for me LOL . But thanks to your help moped is going great

Battery Model 48v 30ah Nominal Voltage (V) 48v Nominal Capacity (AH) 30ah Source Resistance (mΩ) about 40 Cell Specification 3.7V 5ah Cell Combination 6-parallel 13-series Cell Size 21700 Cell Quantity (parallel*series) 78pcs Discharge Cutoff Voltage (V) 36.4+/- 1V...

thanks Nealh. I let the battery get low as 47v. As that seems to make top speed approx 22 to 23 KM/h. But on full charge it’s approx 26 to 28KM/h

Ok will do, as like I said at 22 to 23KM/h its a bit slow. I would prefer 26 to 28KM/h I do get a few annoyed cars behind me LOL But sod them, the more they pip there horns the slower i will go.

I have a 48V 30Ah battery on my electric moped. and when its fully charged moped top speed is about 27 to 28KM/h thats when battery says 54.9 v which is fully charged But the battery is now at 47v and top speed says about 22 to 23KM/h which seems a bit slow to me. I think people can...

Yeah I read that bit. dam back luck too

Problem with Moped ( BIG JOKE ) no its working fine, But as its so quiet, people who are out walking in front of me, cant hear me coming, so when I press the Horn and its as loud as a car one He he they jump like mad heheheh. some say god you made me jump. then I say well if I didnt sound...

Well I doubt there is many people here who need help on a electric moped, as most are bicycles, But I will pop in now and again

All working fine on test runs. so hopefully, all ok now at last. dont all start clapping, now Im going from this forum. hopefully I wont annoy you guys anymore. But as I keep saying many thanks to Nealh, Matthewslack, and all others who have helped me. Ive learnt loads about my moped now, and...

Well its an old saying "It comes to those who wait" you may see it on the news at 10 BillyBoya tests out moped. a massive smoke cloud going across the UK. like a comet LOL. test day now rescheduled for Friday 15th cover your eyes folks as it will be a blinding light

All systems go got wheel back on, CHECK, Got torque arms on, CHECK, got wheel nuts on, CHECK, wired up motor wires to points, CHECK, adjusted brakes, CHECK. tested it out on its stand, CHECK. oh forgot added some special loctite glue to axle nuts, and torque arms nuts. CHECK. all...

Well by mistake I have been putting in 39 but glad I have asked here. I’m going to check if tyre is still 30psi tomoz then I will start putting moped wheel back for the road. YET AGAIN GRHHHHH. So hope nothing else happens.

Thanks so I’m right then 30 psi

Well 40 PSI. Can’t be right as it says on both tyres 36 PSI. I will try 30 PSI. front and back

sorry I’m not good at figures what’s 83% of 36 psi

You never get many replies to questions on the ERider forum so if my tyres say 36 psi what would you put in

yes on the tyre it says 36 PSI so for 36 PSI it has to say 2.6 bar is that correct. so would you put in 36 PSI

Ok Update on wheel my brother helped me today, to fit new tube in tyre, and it went on quite easy really. now on the tyre it says 36 PSI but brother says you shouldnt put that much in tyre, as when the pump shows 22 bar he said thats about 32 psi. he said his car tyres he never put in the...

Yes thats what I have been doing. But its very hard levering the tyre onto wheel. not like a cycle tyre much easier. thats why I have asked my brother to come and help as I know I got the tyre on once, well hard to lever last bit over onto rim. its like you have 3 levers but can only hold 2 so...