Search results

Just try to be a good boy :) Of course I prefer a gentle ride and save battery. Sent from my iPhone using Tapatalk 2

Yes I used the supplied speed sensor and the speed shows on the LCD panel. The sensor is at the second pic. I haven't tried the ALDI cycle computer sensor to connect the controller not sure that will work. Pat Sent from my iPhone using Tapatalk 2

Thanks. Ehomer. I replaced the ku65 to sine wave controller in this afternoon and u must say I am impressed. First, it is definitely quieter than ku65. I feel slightly smoothly to use the throttle. I feel the same using PAS. Same to my KU65. Top speed is 20mph without load and 18mph with...

Thanks. Do you have a photo to show what is this nylon cap look like? Sent from my iPhone using Tapatalk 2

Thanks cwah. This is my first setup and at the end I will put the battery pack at the rear rack pannier bag. It is easy to control in that way. Anyone has a good solution about the hook? I wish I can get a extension block from Colin...:(

Photos! I still have not solved the problem with the hook yet. The shaft of the motor is just too long. Not sure the solution... Pat Sent from my iPhone using Tapatalk 2

Good to see it is working now for you. I am setting up the square wave controller for my brompton and sine wave controller for my Dahon jack this weekend. Hope everything goes as planned :D Let's see how they perform and report back. Pat

Have you tried to hold the down button? It triggers walking speed mode. This could help to test the connection with the motor. You do not need to connect the rest to test it. So just LCD panel, controller, motor and battery. Pat Sent from my iPhone using Tapatalk 2

Hi Dave, Just wondering what is the extra wire for? The speed sensor I received has three wires like in the diagram. Pat

Hi eHomer, I have 2 spare speed sensors (ordered for backup), I could send one to you for £5 p+p Btw, I have also received the square wave controller for my brompton. Hope I have time to test it this weekend As my eDahon went dead and I will take a chance to replace the KU65 to sine wave...

Hi all, I know the chance I am getting it is low:( but I hope someone do have a spare one hanging around I would be interested to buy it from you. Thanks Pat

Sorry to dig this post up again. I have tried the kit from the TETS and the motor drives around 18mph with throttle alone. The most amazing thing is that it remains really quiet even on load and uphill. Do you know what motor do they use? I think it is the V6 version with SWXU casing...XD Pat

Thanks but not this one. I have seen one using a C sharp Steel to replace the plastic hook. I am still looking for a solution :( Pat

Thanks Jerry. As the gap between the shaft and the hook is too narrow I need to fix the hook in a really solid way. This plastic hook wont let me tighten enough to keep the screw in place. I have got a new plastic hook from brillant bikes and it still wont let me screw the nut tight on the...

Thanks Trex. I need to open it up and check what happen to it. If something burnt I might need to replace the whole controller. Pat

Dave you are star! I checked the battery with my ebrompton and it runs fine. I can conclude it is something wrong with my eDahon. Thanks Pat

Thanks. I will check the connection when I get home. I checked voltage now it is 40.3v (off from charger after 4 hours) Is it too low? Thanks Pat

Cycled to work as usual and the LED panel went off about 7 miles. Could turn on the LED panel again but it went off 3 seconds later. I charged to full at work now and measured the voltage should 42.6 Tested it out again and it went 500 metres and it went off again. Do you know what...

I will gonna try it. Thanks for the tips Jerry. One more thing, do you know one of our members using custom made hook (like steel hook)? I could not find the link here. Thanks Pat

Thanks. Actually I am using the second one and it is still having the problem. Maybe the motor is too heavy ?