Cycled to work as usual and the LED panel went off about 7 miles.
Could turn on the LED panel again but it went off 3 seconds later.
I charged to full at work now and measured the voltage should 42.6
Tested it out again and it went 500 metres and it went off again.
Do you know what happen to it? If the cell is not balanced it wont should usual 42.6v right?
Would that be the controller problem?
Background:
This battery pack 36V12AH lifepo4
36V12Ah LiFePO4 Alloy 03-CASE EBike Battery With a Carrier Rack - BMSBATTERY
KU65 controller
Thanks
Pat
Could turn on the LED panel again but it went off 3 seconds later.
I charged to full at work now and measured the voltage should 42.6
Tested it out again and it went 500 metres and it went off again.
Do you know what happen to it? If the cell is not balanced it wont should usual 42.6v right?
Would that be the controller problem?
Background:
This battery pack 36V12AH lifepo4
36V12Ah LiFePO4 Alloy 03-CASE EBike Battery With a Carrier Rack - BMSBATTERY
KU65 controller
Thanks
Pat