Search results

You can stay legal by going for a BBS01 250w instead. There are certain tweaks that can be done with a programming cable, that will improve hill climbing whilst keeping it legal. See link below for cable reference, plus other additions that can make the BBSxx series nicer to ride...

Had the joy :rolleyes: of getting to test this device yesterday, whilst totally underestimating how utterly muddy the local tracks were. The bike was caked in thick, grinding paste type mud. Whereas before, I would have certainly had to limp home with chainsuck issues, the bike ran on with no...

https://www.pedelecs.co.uk/forum/threads/where-are-the-batteries-uk.40400/#post-603413

As long as it has decent branded cells, then it'll be good for going long distances and should have a long lifespan.

I would say just stick with a major brand, LG, Panasonic, Sanyo, Samsung or Sony. Read the specs of the particular cells used in the battery and make sure that the parallel group exceeds the maximum current you are likely to draw. E.g. a controller rated at 30 amp maximum, will require a...

https://eclipsebikes.com/lithium-ion-c-1_8/ I've bought two batteries from them before. They are slow to reply to emails, but apart from that, are a well established and reliable vendor.

1. Lekkie bling rings 2. The programming cable 3. The gear shift sensor 4. Eggrider LCD and programmable system 5. Lekkie buzz bars 6. Installation and maintenance tool 7. AeroShell Grease 22 (for final drive regreasing) 8. DPC-14 colour display (the voltage and current reading is a useful...

I would guess that the majority of forum members may not even know what chainsuck is, or ever experienced this annoying phenomenon. Here is a link to explain what it is and the reasons why chainsuck may occur: https://www.mtbr.com/threads/workbench-how-to-un-suck-your-chainsuck.1169608/ For...

1. Lekkie bling rings 2. The programming cable 3. The gear shift sensor 4. Eggrider LCD and programmable system 5. Lekkie buzz bars 6. Installation and maintenance tool 7. AeroShell Grease 22 (for final drive regreasing) 8. DPC-14 colour display (the voltage and current reading is a useful...

This is the programming cable that forum members have purchased and recommended. It even has the required programming software included: https://www.ebay.co.uk/itm/Programming-Cable-for-Bafang-8Fun-BBS01-BBS02-or-BBSHD-Mid-Drive-Electric-Bikes/282891248569?hash=item41dda1e3b9:g:en0AAOSw9Rda~FwD...

Yeah, maybe it's just me, but the Lekkie Bling Ring appears to be lasting longer, although I have no concrete evidence to support my statement.

I think the 40T is really pushing the limit on how small you can go and still achieve an offset. Which is why it looks like they are suggesting to shave a bit off the final drive cover. I personally wouldn't use the 40T, coz there's too much scope for muck to get stuck at that point and jam the...

@Raboa I just realised you meant the actual motor locknuts and not the axle, whoops. If you are having issues with the motor rotating in use, have you made sure the mounting plate knurled side is facing inwards towards the bottom bracket housing? Also, have you tightened the locknuts using...

I think a small minority of cyclists are a danger to themselves. I've witnessed riders blatantly ignore red lights, ride at speed in conditions that require extreme caution, ride with shopping on the handlebars or one handed with a shopping bag in the other hand. I've seen riders wearing giant...

The BBS01B is a mid drive motor with an internal PAS magnet disc and sensor. It's impossible to install the disc the wrong way round and usually only a cracked disc or faulty sensor causes problems.

I'll be honest and say, I just don't think there's the room for one of those. Even if there is, it'll be hard to tighten it up. Threadlocker fluid is the way to go and hasn't let me down yet.

Mine has basic Tektro HDC-300 , which were easy enough to adapt with the sensor and magnet:

Pretty snidy when sellers don't accept the winning bid, coz it wasn't what they wanted, then relist.

How much did you win it for, if you don't mind me asking?

Solution, use a programming cable to tweak a setting or two, then enjoy. I'd start by dropping current limit down about 5 amps on the 'Basic' tab, in the programming software.