Search results

Hi, my bottle cage bosses are close to my seat tube so I was looking for a way to fit a battery without drilling my frame. I bought the Wolftooth B Rad 4 slot base plate https://www.wolftoothcomponents.com/products/b-rad-bottle-relocation-and-accessory-device?variant=27315033477 I found that...

I have used this 10.2mm (diameter) round file, it is useful to gauge dropout width as well. https://www.teng.co.uk/teng-tools-flrd10-10-round-type-hand-file.html

I have not tried these but might work Wolf Tooth B-RAD 4-Slot Mounting Base Review https://road.cc/content/review/wolf-tooth-b-rad-4-slot-mounting-base-286795 Place to buy...

Hi, I was wondering if anybody has tried the CYC X1 PRO, Luna Cycles video below. https://www.cycmotor.com/x1-pro-gen-2

Hi, I use both a BBS02 and a rear hub motor. They are used to commute, shopping and with a trailer. In my opinion the BBS02 is improved with a gear sensor, this adds more cost to the purchase. The BBS02 cannot be used with standard chainrings unless you use an adapter which again more cost. The...

Hi, I use these...

This might work: https://www.parktool.com/product/crank-and-bottom-bracket-wrench-hcw-5?category=Crank%20%26%20Bottom%20Bracket

I thought this might help people with a BBS02. https://www.mountainbikecomponents.co.uk/product/rs7-square-taper/ I contacted the company as the picture looks like a spider is attached to the crank arms. Reply Thanks for contacting us but our cranks do not come with a spider or ring...

Middlesburn Square taper arms https://www.mountainbikecomponents.co.uk/product/rs7-square-taper/ I emailed them about this as the picture looks like a spider is attached to them. Reply Thanks for contacting us but our cranks do not come with a spider or ring attached. In fact you buy the...

According to Halfords the bike uses a Shengyi DGWH2C...

Isopropyl alcohol is good for cleaning rims and disk brakes, I put some on a bit of kitchen towel and give them a quick wipe. Isopropyl alcohol smells so better to do it outside if possible.

https://ebiketips.road.cc/content/news/bafang-has-developed-a-dual-speed-rear-hub-e-bike-motor-3243

Your brakes might need burped / bleed. Rotate/move the hand lever assembly until the reservoir cap is facing up and at level. Take off the reservoir cap. Slowly squeeze the lever repeatedly, until no more air bubbles come off. Refill the reservoir with brake fluid. Put the cap back on and...

I find using a 10.2mm diameter round file works well.

I asked Park tool, their reply: Thanks for reaching out. You may be over thinking it to be honest. There are many trains of thought on this and some like some added space for the grease but others like them to be completely packed with grease. Both have sound reasoning. I would say to apply...

I need to replace the bearing in my front (non ebike) hub. The hub takes 3/16 bearings, they have a 4.78mm diameter. To fill a 4.78mm squared cube takes 0.109ml of liquid. So if one side of a hub takes 11 bearings then: 11 X 0.109ml is 1.199ml. You would only fill half the space each side...

You have to scroll down a bit, contains swearing. https://road.cc/content/news/cycling-live-blog-10-may-2021-283191

https://road.cc/content/news/e-scooter-rider-kills-cyclist-crash-283179