Search results

This is from the rim manufacturers: https://www.ryde.nl/zac-421 TIRE WIDTH (MM) 35-64 Hope this helps.

I wear these: Endura undershorts https://www.cyclestore.co.uk/endura_clickfast_mesh_liner-ID_26627?sv_source=google&sv_medium=cpc&sv_campaign=[campaign_name]&sv_term=[keyword]&gclid=Cj0KCQjwp86EBhD7ARIsAFkgakjLtLuB8qHMNVhQroPctCYUKAc0CE1k4nHStYzIkSVz_VwYPPBW5l8aAlmAEALw_wcB My legwear is...

Here's the user manual, https://www.specialized.com/gb/en/turbo-vado-sl-4-0-eq/p/170202?color=263669-170202&searchText=93920-5302 Scroll down and press manual downloads, press the 11th down. Here is the screenshot from the manual. The front fender stays are mounted by inserting the stays...

I had another look, they are inserted into the hole and bent round.

I had a look at the bike, the mudguards seem to attach to the side of the fork the holes at the bottom look too big).. Is there another hole or a bracket that comes with it to attach on the fork / wheels. It's hard to get a close up look at the picture, I looked at a blue bike, the mudguard look...

Worth a watch

I have a used 26" 7 speed QR rim brake wheel I am looking to get rid of, Shimano Deore XT hub (only 7 speed will fit) with Mavic X717 rim The wheel was hand built, still in good condition, a little bit of rust on the axle, the quick release is not the original, a more modern Shimano Deore one...

Another member posted this: https://www.pedelecs.co.uk/forum/threads/hailong-downtube-battery-mount-frame-mounting-a-battery.40383/ https://www.sigmasports.com/item/Wolf-Tooth-Components/B-RAD-Mounting-Base-4-Slot/HVBP

I have this one, nice tone. https://www.lionbellworks.co.uk/webshop.php#!/Classic-Bicycle-Bell-handlebar-mount/p/8200943/category=2594390

Another alternative to Bafang crank arms. Middleburn square taper crank arms https://www.mountainbikecomponents.co.uk/product/ro1-square-taper/

Thermal top, fleece, windproof / waterproof. Under cycling shorts, cycling trousers (thermal cycling tights with intergraded pad worn under trousers in winter), mtb flat cycling shoes, winter cycling socks when needed, neck warmer (Buff etc). Full cycling gloves most of the time, Portwest...

Park tools do a thin wall cassette tool, the inner bore diameter is 12mm. https://www.parktool.com/product/cassette-lockring-tool-fr-5-2 have not used this, only the thin wall freewheel version.

Hi, I am putting some grease in my BBS02 and thought I would replace the gasket seal at the same time. A lot of places sell the controller seal, does anybody know a UK supplier of the gasket seal. Thanks

I had the same problem, I bought 2 chains and took some links off one and put it in the other. Next time I need to replace the chain I will have spare links

Enjoy

Getting your battery recelled is an option. Send details and photos of your battery to info@ebikebatteries.co.uk Good reputation on here.

What about this? Use a rear hub motor, on the drive side add a single speed cog, on the non drive side add a belt drive using adapter / disk bolts. Use a crank with a single chainring, run the chain over the chainring and the motor drive side cog. Connect motor using brackets, one end would be...

Would this work. Buy a BBS02 chainring adapter and belt chainring as below. https://www.ebay.co.uk/itm/CONTINENTAL-CDS-ECO-39-TEETH-BELT-DRIVE-E-BIKE-FRONT-PULLEY-RING-BCD-130-/184005609665...

Somebody more clever than me will probably work out his to use a BBS02 to make this work. Keep standard crank set up, stick the crank drive in the frame upside down, replace the toothed chainring with a belt chainring,, make a wide belt holder (as in picture, attach belt holder (washing...