Search results

When you tighten the bolt that fits into the bottom bracket spindle thread it pushes the crank into the square taper. You could put the crank on untightened and post a photograph of the space between the crank and frame. Another thing you could do is put the old crank on untightened and measure...

Hi, put a flat piece of plastic / cardboard / wood against the lip then measure from the cardboard (inside) to the outside edge of the square hole in the crank (outside). Measure from the edge of the bottom bracket (frame) to the outside of the bottom bracket spindle. This should help you work...

Hi, it sounds like you have a square taper bottom bracket. This crankset will fit a square taper crankset and has 3 chainrings. Gear Ratio: 48-38-28 teeth...

Your brake might need bleeding / burping, this removes any air in the hydraulic fluid. YouTube has videos on how to do this. This might help. https://www.bikeride.com/bleed-tektro-auriga-comp-disc-brakes/ You can also buy a service kit, first seller I came to so you might get it cheaper...

My trailer is a kids trailer with the exterior framework and cover removed,. the top covered in varnished wood and a plastic container bolted to the wood. I use it to take stuff to the scrapyard, I call it my S.U.V, Scrap Ulitity Vechile.

Hi, thanks for posting this,. How difficult was the new rotor to fit. Thanks.

Hi,bi accidently knocked my BBS02 wheel magnet (the one attached to the wheel)., it ended in the reverse position. This resulted in it feeling like the PAS was disabled, I don't know if it actually was. Can anybody explain what reversing the wheel magnet does to the BBS02 system. Thanks for...

I have an ebike (26" wheeled MTB with BBS02) and a flat bar road bike. I use my ebike for shopping and going to the scrapyard, the non ebike gets used on my longer Sunday rides. Sometimes it's nice to ride on a lighter bike, I would say the ebike helped me get fit again.

Keep your chain on, I have edited my post.

Let's say that you get another 3000 miles after spending £125, thats 4.2 pence per mile. Buy a freewheel / cassette remover and chain tool to make it even cheaper. A good tip is to buy a quick link a different colour to your chain, this makes it easier to see when your chain is muddy and gives...

Hi, I was wondering if anybody has tried one of these on their throttle...

https://ebiketips.road.cc/content/news/10000-people-have-reserved-vanmoofs-50kmh-e-bike-3573

https://ebiketips.road.cc/content/news/new-forest-could-ban-e-bikes-from-cycle-trails-3549

I have found that it easier to get replaceable parts LCD screen etc for a conversion kit. My ready bought ebike has a lot of unmarked parts and trying to source them is a pain.

https://www.ryanbuildswheels.co.uk/spokes-from-ryan/

The way I look at it is that parts are cheaper than car / motorcycle parts to replace i.e. disk brake rotors, chains, tyres etc. I use my bike for exercise, carrying shopping and going to the scrapyard (which gives me some of the cost back). Does the joy of riding your ebike compensate for the...

These channels are sponsored but will give you a rough idea for what you will get for the money. https://road.cc/ https://www.bikeradar.com/reviews/ Police auction site https://www.bumblebeeauctions.co.uk/XcAPViewInCat.asp?ID=24 They currently have an electric bike on it. Also try Gumtree...

Here is an example of a single speed chain from a good company, call them a call. They do a made to measure service: https://bankruptbikeparts.co.uk/collections/chains/products/kmc-z1x-ecoproteq-1-2x-1-8-quality-chain-for-bmx-fixie-we-cut-to-your-length If you are still unsure go to your local...

This is an article on chains and the difference. https://www.parktool.com/blog/repair-help/chain-compatibility You need a single speed chain

The key putting on puncture proof tyres is adjustable zip ties. Put the bit that the tie feeds through against the rim, this provides a more stable platform than the tyre. I find a good quality metal spoon (the best tyre lever ever invented) with a curved end helps to get that last little bit as...