Search results

One will need to carry out various tests/fault finding to find an issue.

If someone wants a throttle them so be it and they can have one, it's not the end of the world and tbh no one will be stopped that often if at all. If a certain topic irks you simply don't reply rather then sounding like a stuck needle on a record, no one cares about your views or whinging.

Buy a battery with v.g cells it will last many years and perform likewise. My 2.5 diy bottle battery with HG2 3000mah cells is only 6ah but easily manages 30 miles/50km with 35- 40% remaining.

Simple answer yes for a very short while , logical answer no unless you like peddaling with no power. I can tell you BBS01 is a POS to pedal unpowered for more then a mile or two, it is bad enough going a couple hgundred yards.

The bike is an Amazon bike so will be basic speed control system. There isn't much info on the net about them. Going on the info given regarding the older model have a look at the brake levers to check they are seated back correctly . If one can trace the brake cut off wiring back to the main...

If one has L settings then L3/0 will activate non -Hall mode .

Yep manage your own money and do the homework and you might get lucky . Don't let someone else like an IFA live off your money. I dabble 5% of my portfolio in the high risk US penny stocks (which generally are stocks under $5). Current portfolio down by 2k some have tanked but one back in May I...

Remember though that balancing is very slow approx. 100ma rate and voltages quite close.

Hollow tech simply need a BZ10C.

It's been answered in the other thread by Daniel. If it has been mounted correctly and the sensor /magnet gaap is about 1mm C1/5.

Baby boomers/gen z and the previous generations worked for what they have , it is th later generations who think the world owes them a living. I'm a boomer started work at 11 with a paper round 7 days a week until I was 15, whilst still 15 I started my adult work life in the buildings trades...

If you want a tank then a Kudos Safari would be the answer , not sure Kudos are in buisness any more.

The weight will be one thing , one expects. As for the current draw , simply ride around in PAS 3 so current draw doesn't pass 10a . Then see if the battery consumption lessens vs Mrs. Adwb.

Wow holy resurrection after 10 years, Jesus didn't take that long, otherwise christiananity may never have ocurred.

KT controllers are called 'Imitation torque' by the Chinese and are known by us as current control. On their web page their are no TS controller options.

I have only seen those cylindrical controller on TBK but not TS ones, so the KT one is a custom OEM option.

P1 does affect some hubs , my akm128 wouldn't go over 10mph until I input the correct or near enough value. I had swapped out my bafang cst motor wheel and forgot to adjust the P1 .

There is a new covid strain doing the rounds and it appears to be hitting the elderly or others with under lying conditions. Sorry to hear you have been ill of late d8veh and wish you well back to better health soon I hope.

I have two of these and they work ok when new but once worn in I found my two are garbage, the four main bush's are trashed and worn along with the pins. Mine have done 1000'sof miles , but would never buy any more.

Kirby ebikes do a 48v 250w KT kit , though it is a front wheel kit.