Thanks to everyones help.
Update on my "worn?" chain saga.
1) No tight links
2) Measured accurately with steel rule 40 links = 508mm. Actual length 511mm therefore due for replacement
3) Investigated gear change to check for less than perfect set up (seemed ok so far) I couldn't get it into bottom despite accurate adjusting both the limiters. Checked the cable and one strand had strung out, despite my soldering the end.
4) Conclusion is worn chain and defective cable
It never rains but it pours!
Update on my "worn?" chain saga.
1) No tight links
2) Measured accurately with steel rule 40 links = 508mm. Actual length 511mm therefore due for replacement
3) Investigated gear change to check for less than perfect set up (seemed ok so far) I couldn't get it into bottom despite accurate adjusting both the limiters. Checked the cable and one strand had strung out, despite my soldering the end.
4) Conclusion is worn chain and defective cable
It never rains but it pours!