Good suggestion. Interestingly, the same reels were listed as £22 for me, so £11 at half price. Can you check those prices again to see if they're the same?
3-D Printer
- Thread starter saneagle
- Start date
Try this URL:
I just added 2 rolls and £10 with free shipping
Fill yer boots!
(EU only)（Pre-Sale）PLA All Series Filament，1kg (MOQ:20 Rolls,Mixable)
(Only available in EU) Eryone PLA All Series 3D Printer Filament, 1 kg/Spool, Diameter 1.75mm, offers 100 different filaments, affordable price and good quality
eryone3d.com
I just added 2 rolls and £10 with free shipping
Fill yer boots!
Thanks - very much appreciated. It worked this time. You missed out on commission. I just ordered £111. If you used the referral system , you'd have got a percentage of that and every other time I order.Try this URL:
(EU only)（Pre-Sale）PLA All Series Filament，1kg (MOQ:20 Rolls,Mixable)
(Only available in EU) Eryone PLA All Series 3D Printer Filament, 1 kg/Spool, Diameter 1.75mm, offers 100 different filaments, affordable price and good qualityeryone3d.com
I just added 2 rolls and £10 with free shipping
Fill yer boots!
View attachment 59732
It's 5% on all sales to me, so £5 now and another £5 when it runs out, and so on into the future.
The lid is only temporary to check that the cell-pack and BMS fits. The lid will have a stepped extension that will include the charge socket and main cable exit. I gave up on the idea of a removable battery because it's safer to charge outside, and everyone has an extension lead. Also, it's quite complicated to self-make a mechanism that holds it securely.
They didn't tell me until after my order was confirmed. You must have had the same message and ignored it or didn'tcommitit to memory. Bad luck.You might have told me that before you did you order...
"This is a collection of physical items, as well as digital files you can download and make yourself"
Marin Rift Zone Mud Guard + Loam Meter (3D File)
3D files for bicycle can holder
Power Drill Can Chiller
Marin Rift Zone Mud Guard + Loam Meter (3D File)
Marin Rift Zone Mud Guard + Loam Meter (3D File)
This file prints flat and then you use a heat gun or hairdryer to mold it to your frame. This makes it easy and efficient to print. Attach with 3M or Gorilla clear double sided tape. You can print multi-color, pause the print before the letters and change filament, or just print all one color...
outsidebrendan.com
3D files for bicycle can holder
3D files for bicycle can holder
As seen on the internet! Print in PET/PETG or PET/PETG CF, on its side, with a brim. Happy trails! For personal use only.
outsidebrendan.com
Power Drill Can Chiller
Power Drill Can Chiller
As seen on IG. Use an M5 bolt or anything close enough as an axle, spin with your drill in some ice, chill your beverage! Cheers.
outsidebrendan.com
Completed first print using new Eryone gray PLA, prints great however they appear to have changed the recipe for 'gray' and the new spool is a little darker than the previous spool, it's noticeable so I have ordered a lighter gray basics from amazon (light gray PLA is not common).
The Circuit Graver
Carve PCBs at home using a machine you build!
Carve PCBs at home using a machine you build!
A Step-by-Step Guide to Build a Low-Cost Drone using ESP32
World's largest 3D-printed neighborhood nears completion in Texas
World's largest 3D-printed neighborhood nears completion in Texas
As with any desktop 3D printer, the Vulcan printer pipes layer by layer to build an object – except this printer is more than 45 feet (13.7 m) wide, weighs 4.75 tons and prints residential homes. This summer, the robotic printer from ICON is finishing the last few of 100 3D-printed houses in...
www.yahoo.com
Related Articles
-
MTF Enterprises announces acquisition of EMU Electric Bikes- Started by: Pedelecs
-
Wisper 806T folding bike wins Which? ‘Best Buy’- Started by: Pedelecs
-
Sustrans calls for protected cycle lanes- Started by: Pedelecs
-
Amazon launch their first UK e-cargo micromobility hub- Started by: Pedelecs
