Search results

I used a yose kit off eBay you can Get one without a battery Neil

Just been out on the bike after the conversion to electric It’s better than I was expecting a nice steady 10 miles in about a hour Been up hill I would never try or I would push the bike up pas 3 and never used the gears Will have to tweak the wiring and the throttle position’s all in all its...

Any idea what toque they should be as the original Wheels are quick release Neil

Thanks for all comments When I was in the construction industry we was told to use bolts with at least 1/4“ of threads showing Neil

True I was thinking I could a thin one on Then another thin one to act as a locking nut Neil

Hi Anybody know the nut size for the Yose 250w front hub I been looking for some thinner one as the axle does not go all the way through

I had the bike upside down put a small amount of super glue on the magnet then placed another magnet on top with the aid of long nosed pliers And got glue on my fingers but that was because The tube was new and had to be opened and It when on my fingers Neil

Flip flops as well

Hi Time will tell if super glue isn’t good enough Might put some in a bag with some small tie wraps I got them off eBay search for neo magnets Neil

Hi Yes only 1 fixing bolt and Velcro strap But I have fitted battery bracket with 2 bottle fixing points a hose clamp holding the bracket then battery Holder with 2 bolts and a 50mm Velcro strap It’s very secure now

Hi Silly question did you switch the battery switch on Make sure all connections are full pushed in When I tried mine before fitting to the bike With the bike upside down it worked When I fitted it when my tyre arrived with the plugs Unplugged turned it right way up plugged it all together...

Hi Torque arm fitted but I have fitted it this way Because the brake calliper is in the way Don’t think it will fit the other side because of the cable plug not going through the plate Might get another for the side and try it Neil

No problems No not yet hopefully at the weekend

Photo of the brake sensor cutoff

I know what you mean seen to many crime Videos where they turn up with battery operated Angle grinders Like I said before I never leave the bike unintended Mainly used for leisure ride where I go out and back and don’t stop

Hi Not fitted the torque arm yet I have looked at some settings on YouTube will try the default settings first The bike is locked in a garage with a alarm and a Anchor fitted to the floor I never leave the bike anywhere Might invest in a good lock any ideas Neil

Hi Photo of the yose brake sensor the magnet’s are held on with 3m vhb pad and the each magnet super glued on top of each other seems to be holding Might fit a small tie wrap on

Hi Just a couple of photos need to tidy the wiring up Waiting for a battery bracket because it just Held with one bolt and strap

Thanks for all you comments I understand what the bolt and clip are doing now They are basically holding the plate that goes on the axle to stop the motor chewing the aluminium dropouts I will fit it behind Neil