Help! Nut size

[Neilgtis]

Hi
Anybody know the nut size for the Yose 250w front hub
I been looking for some thinner one as the axle does not go all the way through

 

[mr_ed]

Not sure it matters does it? Might as well have that one on there than a thinner one; it'll be the same strength if the same number of threads are engaged.

 

[Neilgtis]

True I was thinking I could a thin one on
Then another thin one to act as a locking nut
Neil

 

[Nealh]

M12 x 1.25 fine thread pitch , they are all std pitch size for ebikes so one will proably have to buy spare nuts and machine thinner if it really bothers you.
A generic M12 is 1.75 pitch so don't use them.

Leave it as it is, it will prevent the axle thread from damage and x threading.

 

[Neilgtis]

Thanks for all comments
When I was in the construction industry we was told to use bolts with at least 1/4“ of threads showing
Neil

 

[Nealh]

They have the falt inner face serated to prevent undoing but if concerned use a bit of locktite on the thread.

 

[Neilgtis]

Any idea what toque they should be as the original
Wheels are quick release
Neil

 

[Nealh]

No idea, I just nip them up tight + 1/8 - 1/4 turn. The nut thread will strip if torqued to high.