Search results

Anyone know what software version my 2018 Cube ebike would have had installed when I purchased it at end of 2017? Whilst my bike is in the local bike shop for repair, they have mistakenly performed a software update, and I want it reverting back to original. Just wondering what version it...

Wasn't aware of that product, I'll give it a try, thanks.

The seat post hasn't been changed, I just removed it, inserted a length of metal tubing into the frame, and then dropped the seat post back in. The tubing sticks out and the seat post goes over the outside of it and slides down. The tubing is cut to just the right length for the seat post to go...

My return home commute ride is up some very steep hills, so maybe thats why?

I have a 2018 Cube ebike with Bosch motor and I use a Badass dongle (version 3.4??). Whilst my bike is in the lbs they have updated the software as forgot to ask them not to. They have offered to revert it back for me. Does anyone know if my Badass will still work with the latest update, or will...

Does anyone know if the Bosch speed sensor cable on my Cube Race 500 routes along the bottom of the seat post tube? In other words, if you were to remove the seat & post and shove a stick down there, would it come into contact with the cable? The reason I ask is my speed sensor cable has...

My 2018 Cube Reaction Race is at the lbs for fault diagnostics, and they report that it has had 115 battery charges and the battery has reached its highest temperature of 44 degrees which is unusually high. They suggested that it must have been left out in the sun, which it hasn't as its never...

Just got the bike lifted up to have a look. Do I need to remove the skid plate before I can remove the left side cover? As well as the two obvious bolts on the side of the cover... Theres also two on the front (though one may be for the right cover), and the two for the skid plate...

I'll give that a try thanks. I've got a the tools from when I changed the front chain ring, so I shall see of this fixes the problem, thanks.

Thanks, I have removed the battery and cleaned the connections. I'll have another look tomorrow and if I can't fix it I might have to take it to the local Bosch approved bike shop

Dirt? I haven't got a clue, which is why I asked the question.

Is it likely to be a loose connection under the cover?

Any suggestions for this please? Got the '503 ERROR' come up on my Purion display today. Bike was riding fine but then when freewheeling downhill I noticed the speedo said zero mph. I stopped and turned the display off/on and same thing again. Set off riding and could feel that the motor wasn't...

There be monsters....

I had something similar happen to me... https://www.pedelecs.co.uk/forum/threads/shimano-xt-rear-mech-snapped.36519/

I have that exact same tools but I never find chain checkers to be accurate, It showed 0.25% wear on the brand new chain before I'd even ridden the bike.

Thankfully, a few weeks after doing the repair the bike is riding really well again. I had to twist the rear derailleur back into shape slightly with some pliers as the chain was catching on it. Initially it was fuming a couple of gears when changing down from 5th to 4th gear, but a half turn of...

Their Eagle lights seem to be out of stock everywhere but the MJ908 looks good. I like the battery level display feature and how it tells you which brightness mode you’re in. Expensive but I might buy one.

Doesn't look ike this model is available anymore which is a shame.

I didn't even notice one to be fair. Is it possible to fit sprockets back to front, e.g. the outer face facing inwards??