Search results

you´re right about the dominant possion in europe from Bafang. Even I´m not a fan of Bafang I must admit that they found a way to be popular in europe. I was one of the first seller in europe who has sold Bafang but Bafang was also the reason why I didn´t wanted to be a seller for e-bike motors...

Testride give´s a very good impression it´have higher torque as the Bafang , noise is like the Bosch so a bit more than the bafang bbs but up now the system looks very good. can use roadbike five-arm chainwheels with 110mm but this option is only for hub-gears. Chain-gears has the same problem...

it should work for this easy job... I always use what is next to me on my work-desk and has two pin´s...

here is some phot o from pliers you can use forthe job. You dont need to buy the good brand for this easy job so I guess 10euro is enough, not big money. I would buy the red/yellow one the circlip-plier you better buy as a set but even a set is not expencive maybe 30euro and have sense if you...

Hi trex, I cant realy explain because after a lot of talks with Mr Wang, the Boss from Bafang, I gave up talking about quality and improvement. My solution is, try to collect information about the product and do the maintance by yourself. the chinese simply don´t care about if maybe 10-15% of...

Hi Nealh, no apologies needed, I´m not that sensitive:) I know the bbs motor very well because I let produce a small series for fatbike´s with a 100mm bottom-bracket in China, the first sample´s are on their way to me for a quality controll.....;)

yes it would be nice if they realy bring it to work. Until now it still not to buy so far I know. Since 2years the e-ram System is shown on eurobike-exhibition and I remeber they said it should be ready end of 2014 but there is still only a prototyp to see...... The gearbox is very special, it´s...

yeab, I´m using a circlip-plier but you also can use a needle-nose-pliers or something else with two pin´s. You also can use a srew-driver with a slight hit on his back the nut should be open and the rest you can spin with your fingernails. The nut is not tight. at california-ebike you can buy...

hi trex, you´re certainly right if the product would come from europe but if the product comes from China...... I have BBS-Motor´s with just a few km riding and it was neccassary to change the axle and the bearings! I have seen motors with a damage from first day because it was wrong assembling...

hi, as promised here is the disassemble instruction with a lot of photo´s If you do it the first time you maybe need something between 15-30minit absolut not more. I hope it is helpfull to you or others. You can let the motor at the bike, it is´nt neccassary to build the motor out of the bike...

dessamble of the crank is quite simple, If you want I can make a photosession how to do, at the time I have around 20pcs BBS Motors for repair here so I can describe you the way step by step. Drive further and waiting isn´t realy an option because if the noise comes from the needlebearing, the...

the click might be the needlebearing inside the bottom-bracket. The Bafang is easy and cheap to repair even for people with low mechanical skill´s The value of warranty from bafang or other chinese companys is zero but it dosent matters. All Bafang BBS-part´s or bearing is easy to buy and easy...

some motor is truely only the lable changed and not more, proove of this suspect is that I cant see any difference between the 250Watt BBS and the 350Watt BBS only the controller is different. Bafang send ones a package with overpainted housings, if you looked good you could see the 250lable...

Hi Tony, thank´s for your warm welcome after such long time ;-) sometime is good to take a brake to bring thing´s back into focus and I was very tired of the chinese quality. Even all my friends, wife and my daugther are chinese I always try to convince them take more effort on quality not on...

I think 350watt is enough for a ebike as the best mixture for weight,consumption and the feeling to ride a bicycle and not a Motorbike. But It´s just my personal opinion and other user´s maybe come to a different conclusion I´ve tested a lot of different motors/bikes from 150Watt up to...

hi, if somebody searching a winterjob, check this offer: eBay: Neue und gebrauchte Elektronikartikel, Autos, Kleidung, Sammlerst it shows a near by complete chaindrivesystem with a bafang swxk(hall-version - 190rpm) with controller, speedlimiter, crankfreewheel, Software and setup-wire for...

Hi, i found in my basement 1swxu opening tool 1swxh opening tool 1swxk opening tool for first serie´s (it also can use for swxk5 but need some small modify) each is 20Euro + shipping 10euro or all together is 45Euro + shipping 10euro I have no idea is it expencive or not but it is...

hi andy12, you have wich motor from 8-fun? if you need a opening tool for SWXK or SWXH Motors, contact me "d8veh" is right, most time is one hall-sensor gluwing or the connecting is brocken Hall-sensor (spare-part is some cent) can fix but i would reconmend a sensorless controller in...

i never hear about jumping chains and i would be surpriced if the chain is jumping because i have driven many crankdrive´s. The only one motor with problem in this way was my cyclone. The cyclone mounting-plate always was moving under higher load, so using was under hard conditions But i have...

As a car mechanic, i say good way of repair a good mechanic need a hammer and a pipe wrench ;-) more is luxury have agood day frank