Search results

  1. mechaniker

    Cargo-Bike selfmade

    Yes you´re right, price´s for cargo-bike are to high because a cargobike is not much different from a normal bike. The frame is sure a bit more expensive and a bit more work to do and because of the size has a higher handle-fee and a bit higher price because of smaller series but if we count a...
  2. mechaniker

    Cargo-Bike selfmade

    Hello Folks, I just wanted to introduce my new cargo-bike that I made myself. I used Steel for the frame because easy to weld and cheap, the next will be a Alloy frame because the next bike should have a centermotor bafang-max-drive or shengyi cmt03 because nobody produce a welding ready...
  3. mechaniker

    Could you give me your opinion on this kit?

    thx for measuring. HHmm.... so it does not fit 10-11-12 speed cause the chainline would be to bent, ****. Maybe the crank without the controller but keep the torque-sensor-unit the chain-line could go down to 45mm ? It seem´s I need my colleagues to send me one of those for testing;)
  4. mechaniker

    Could you give me your opinion on this kit?

    I think 120 is rather cheap than expensive if it works reliable. Not my favourite solution but the idea is not bad..... torquecontrolling and hollowtech-II compatible is for sure something nice in compare to other cheap solutions on the market. Where is the chain-line, less than 50mm?
  5. mechaniker

    Advice for disabled rider on steep climbs - realistic?

    it is impossible to climb 20% with no effort of the driver with a street-legal pedelec, 28" wheel and a system-weight of maybe 120kg. Simply forget this idea. Best hill-climbing Motor at the moment would be the Heinzmann cargo-Motor but it is not cheap and not easy to get as a consumer. That...
  6. mechaniker

    Bafang BBS01 Troubleshooting guide

    usually on the bbs the PAS or the mosfet go brocken and this is very easy to meassure with a multimeter, please check the pic´s. But on the end @d8veh is right it has no sense for repair cause it is very troublesome to clear the silicone for replacing the mosfet it is just a meassurement for to...
  7. mechaniker

    Lishui Bluetooth Controller, programming the easy way

    hello tommie, nothing can work with any system, it would be nice but impossible because all the manufacturer will never agree to a common standard protocol It works with Lishui Controller using Displays from Kingmeter, Key-display, APT and more but usualy only FOC Controller. Point is that the...
  8. mechaniker

    Lishui Bluetooth Controller, programming the easy way

    Hi Ed, if the "QR-code" dosen´t work then take this link: http://app.lsdzs.com/home/ I remind our engineer to develop a upright screen for man and he said it is already under deleopment and will come soon.... For those who have the FLX bike here is the connecting-diagram
  9. mechaniker

    Rear hub motor choice

    I suggest you open a shop for this items and then you will know why..... Honestly dealing with china manufacturer isn´t easy and when you deal with it in europe you must give warranty. Over the last 10 years I´ve seen a lot of companys come and go and all of them thought it would be easy to earn...
  10. mechaniker

    Best retro fit mid drive unit

    it is a normal PAS magnet disk and since so many brocken motor at the dealers I guess you can buy this disk at any serious BBS seller in the uk The two magnetic lugs that you mentioned are actually just to melt the magnetring solid to the e plastic disk btw, this are not two magnets the ring...
  11. mechaniker

    Lishui Bluetooth Controller, programming the easy way

    I also directly said to our engineer that I would like a upright-screen because then it would be easier to watch the screen and swith to a map on tour, I´ve also requestet a bottom on our screen for to switch between bike-display and map-programm and maybe music a heavier font I missed because I...
  12. mechaniker

    Electric kit for Helios Tandem?

    there is no advantage for a cranckdrive if the bike has 20" wheels and the power of a Heinzmann-Hub is higher as the Bafang bbs even on step hill but of course under consumption wattage. good point on Heinzmann is his power but not good when the battery is empty. Good on Ezee is the freewheel...
  13. mechaniker

    Electric kit for Helios Tandem?

    there are 30t sproket for the bafang-bbs on the market and also 36t ready to replace the original one without adapter but I would follow John and use the front-hub I like the Heinzmann because of the power but the ezee is also a good choice because of the freewheel. Frank
  14. mechaniker

    Lishui Bluetooth Controller, programming the easy way

    today I wrote the manual ready and hope I did not made to many mistakes in gramma :confused: and on the second pic you can go directly by using the QR-code to the app for IOS or Android Question for the supplier I cant answer at the moment but I guess there will be a lot in the next month...
  15. mechaniker

    Lishui Bluetooth Controller, programming the easy way

    Lsihui Controller developed a Bluetooth Controller for IOS and Android Smartphones Even someone with no Computer-knowledge is now able to programm the controller just by a finger-wip at IOS or a finger-tipp at Android Smartphones We have put different language inside english, german, chinese...
  16. mechaniker

    Torque sensor crank drive

    it´s tongsheng and it si dicussed here in the forum several time´s it can´t take 2 chainring
  17. mechaniker

    12,7Kg pedelec

    Hi "cwah" thats a powerfullfull motor I did´nt knew it before, thanks. I would be worried for the chain at such power. In mountainarea it should make a lot of fun but I prefer Road and inside the law
  18. mechaniker

    12,7Kg pedelec

    I did this once but it was to much work. I had to push out the PF and then to drill an excentric adapter instead of the PF. and the BBS-Bottom-bracket must also change becaus the bike had nearly 90mm wide bottom-bracket and so on. I have a friend with a drilling-company in china and they have...
  19. mechaniker

    12,7Kg pedelec

    my light weight racing-bike Total weight is only 12,7kg "ready to race" Motor comes from "Shengyi" with 350rpm and only 2,2kg . The Motor I have ordered at my friend in China (www.woaczh.com) basic bike is a Radon "Spire" which has only 7,5Kg and is outfitted with complete Shimano...
  20. mechaniker

    Trike conversion to electric

    I agree with @flecc that the only solution seems to be a rear-hub. On a cargo-bike like that I would suggest a powerful motor like Heinzmann or BPM-CST or Bionx-D Frank