Search results

Yes Nealh you are right 43Km/h. Is the No load speed as not sitting on moped and riding it. But 32 Km/h. Is about 19 mph. I think ERider are on about there ERider model 15 when it had 4x 12v SLA. Batteries or maybe 2x 24v ones. As that sounds about right 25 Km/h. About 15 mph. I had...

Yeah I cant believe after 3 months I've got it going with help from you guys here, its took a lot of hard learning etc, but what I've learnt here I couldn't have known myself. so I'm so grateful to you people. I was in no hurry for moped anyway as it was way too cold. to ride it this weather...

Hi all I just have to say many many thanks to all here who have helped me on my electric moped. as thanks to matthewslack and what he told me about the motor wires etc, the moped now runs after 3 months of not working. I just had to kneel down and pray LOL before the big moment of testing...

It was just what someone said on another forum. But I'm not changing all that now. as its been ok. other wise I will be on this moped too much LOL. all I have to do when new motor cable arrives is to solder the 5 sensor wires and 3 phase wires at motor end link rest to controller, and...

L=Live wire on battery plug someone has suggested to change the battery lead plug and cable on moped which is a IEC type plug, with a ring connector other end to fit on junction box. to a male deans plug other end, what can then be plugged into the female deans connector on battery. But what...

I did a continuity test from L terminal on battery plug what goes to battery to that wire with white sleeve, and it did beep so its obviously live + wire. Yes like you said who ever wired it up must be colour blind, as under that wire in white sleeve is a black wire.

so I am correct then, as the orange wire on right comes from ignition key, which goes to that thin red on left same nut as orange which you say is switch wire. so yellow wire on throttle will go to that nut where battery lead in white sleeve is on right, marked with a blue line, and the...

but where is switch wire on the controller, as I don’t have to switch controller on. As it only works once battery is on and you press throttle. or do you mean the ignition switch wire. As there is a orange wire from ignition switch going to a junction box then it goes to a thin red wire at...

anyone here knows how to wire up a thumb throttle with battery indicator and key. I know the green, black & red are for throttle at controller, but on a throttle with key and battery indicator there are 2 more wires Blue and Yellow. I think the yellow goes to + side of battery but where do...

interesting

It seems what this man is trying here is what the previous owner who had my moped was trying to do, as those 3 phase wires was joined at ends like you told me to do, and he is now separating them. so I will see how he gets on and where will he join the cable to unless the video stops before he...

Same here. All I’m waiting for now is. New motor cable then hopefully thanks to mathewslack help on the motor it should run.

Would this do https://www.ebay.co.uk/itm/123126491591?epid=2254833043&hash=item1caae929c7:g:ltAAAOSwQO9a9aMk

Thanks Matt 2 more to go lol

1: can anyone here tell me what sealant do I use when I replace side covers on motor to stop water getting in 2: if I fit a thumb throttle with battery indicator and a key. where do all the wires go, I know the 3 black, red, and green are for throttle, but I believe there are 2 more wires...

Well I cant thank you enough for all this, and yes I will check later regarding a thumb throttle, as I would prefer one with a battery indicator, plus a key. but don't know where the 4th wire in throttle go to at the controller. Your help same as others here are most appreciated. this moped...

So Matthew am I good to go now, when new cable arrives. to join up to motor wires. also is it possible if I could use a Thumb throttle rather than a grip type. as I would prefer thumb type. with a battery indicator and key. but there is only 3 wires on a hand grip one. so where or how do you...

Yes regarding the cable passing through the hole in axle well god knows how previous owner managed to fit 3 thick phase wires 3 thick add on cable wires plus 5 thin sensor wires too.

So am I ok now what I have done by joining those 3 loose wires, and this test do you mean test green and blue phase wires for a beep then yellow and blue and yellow and green for beep then all I need to do now is when new cable arrives is join up the 5 sensor wires and the 3 phase wires

so is it now ok to join those right 3 wires Well I have now joined them as I think this is what you mean. I will of course place some shrink wrap over end