Search results

  1. billyboya

    What cable required

    Yes as I did mention this before, I had managed to do 39 km/h 24 mph on a straight road, but according to E-Rider the max is 25 km/h 15 mph so yes who ever had moped before me had done something to motor, as there was a extra cable from back wheel what had 3 wires brown green/yellow and...
  2. billyboya

    What cable required

    Im now a bit confused as you say green phase to blue well that wont beep as its not the end of that green phase wire the 1st one on right is that green wire end. no I have not as yet joined up those 3 wires on right When I tested phase wires for continutiy to see what ends go to what phase...
  3. billyboya

    What cable required

    Hi ok I will join those 3 loose wires together, solder I mean. would heat shrink tube be ok to place over all 3 once joined I dont know what you mean what you said above. you mean phase wires yeah. how do you test for open circuit Btw I forgot to mention, but the previous owner of this...
  4. billyboya

    What cable required

    When you say resistance scale what or where is that on a meter. I just tried continuing on each phase wire and yes they do in order link up to those 3 other wires in yellow circles so are you saying to join all 3 of those broken wires together with that red tape on and that grey one too
  5. billyboya

    What cable required

    But if I hold probe on black wire only then touch each colour in turn nothing happens so surely it’s probe on red wire then touch each as that registered ok all 5.15V.
  6. billyboya

    What cable required

    ok I am with you now. So join the red lead to red wire and black lead to black wire from the usb lead. Then touch red wire and black with meter probes set at 20v. Dc Then you say just leave black wire on black lead ground and touch each colours in turn ok will try that later ok I think...
  7. billyboya

    What cable required

    Well its no good as I only use a iphone lead plugged into a socket via a USB to micro usb it has 4 wires cant I just cut off the micro and use red and black wire Well then I'm a bit stuck as don't have one of those. so how can you tell then if its 5v what you testing. as don't you have to...
  8. billyboya

    What cable required

    Do you actually mean a mobile phone lead like usb 1 end and micro usb other end like below, the just cut micro end off. as I have plenty leads like that to use. most mobiles use a usb lead anyway Im sorry But I dont understand all this can you explain then once the polarity is checked wire...
  9. billyboya

    What cable required

    Will the meter read those hall wires if not plugged into anything. I do have a test meter do I just place it on 200V DC or is that 20v DC and you say as Im not clear yet on what you mean in image below do you mean 1 to 1 touch the 1 to red and black probe to black minus then red...
  10. billyboya

    What cable required

    Yes I will tape the end of cable to a cone shape to thread new cable through. But my motor is much different to in that Grin Video. as it has a cut out in side of axle, which comes out opp end of axle near motor through a hole, as you can see in pics below. I have now also sorted out wires...
  11. billyboya

    What cable required

    Yes may try that or like Nealh said butter from fridge lol but god knows how I’m going to thread 8 wired or 9 cable through the axle as it seems it goes through side of axle and out through top but I can see a clip at bottom of axle so maybe that will remove that end of axle not sure yet also...
  12. billyboya

    What cable required

    Well by removing case it will give me more access to the wires and where they go well case has come off ok and now can see the sensor and phase wires
  13. billyboya

    What cable required

    I have checked behind the rivets and there isn’t anything but can see the wires now when I shine a torch behind inside case. So will case come off then if I replace freewheel then use gear puller to get case off EDIT: Well I’ve attached the freewheel and now using gear puller and it does seem...
  14. billyboya

    What cable required

    I’m very confused what’s cake and hu Can you repeat please are these the sensors but they seem to be on the freewheel side
  15. billyboya

    What cable required

    No you are right as the wires on opp side of freewheel Need to be cut. Like he does in that grin YouTube video then I can see if I can. Grip all those loose wires with a pair of pliers. And pull through freewheel side. Then thread new cable through. But only trouble is I don’t have a clue what...
  16. billyboya

    What cable required

    What a idiot I am a bloody 6in gear puller is way too small I should have measured side plate 1st it’s 9 1/2in wide. So it’s 10in I need this dam moped is slowly getting close to being dumped Lol. Grghhhh
  17. billyboya

    What cable required

    Well there is no way I can access the wires inside. but not received 6" gear puller yet its arriving today so will try that. maybe that man on grin didn't think of removing the side cover. I mean look at him using his feet to pull cable through not very pro is he if anything he has...
  18. billyboya

    What cable required

    Yes I agree and yes it did say on display 39 Km/h. But this motor has been altered as the previous owner. Not the person I bought it off. Had added it seems a extra wire to motor. Although it wasn’t attached to anything. But there is a plug on old controller which I never plugged in...
  19. billyboya

    What cable required

    Well what's the point in dumping it, when I have paid out all that money, as it was going ok, except when it slowed down, and its not the battery, or controller, as both been replaced. I'm now on the last stages of it the motor. new cable , new battery power lead, not a IEC plug no more but a...
  20. billyboya

    What cable required

    thanks ;)