Search results

Well I know now when I have redone wheel to make sure I place a washer on insides of dropout, then antirotation one next on outside then the nuts in #15 whats that washer on left called is that a torque one as I only have 1 of those

this is what was on cable side of axle and with nut too But I can now see what joelectric sent I didn't have a washer on insides of dropout and anti rotation washers on both sides

But on the cable side of dropout, there is a anti rotation washer. but Im afraid there isnt on the other side of axle. would that of caused it then

I do have a anti rotation washer on that cable side. But Im afraid I dont on the other non cable side would that of caused this thanks for the info on torque am reading that now so whats best torque arms to get for this moped

so what's caused that then, as all I did was fit a new cable. I know on other side of axle not cable side there is no anti rotation washer so is that whats caused it.

What's a torque arm, sorry I'm not all that good on hubs, what's anti rotation washers. EDIT: sorry yes on the cable side is a anti rotation washer but not on other axle side

Haha funny PMSL :D so can you suggest whats best to do from cable getting ripped again Yes I know chain is bad, and it will be replaced too

Hi AndyBike I take it you have followed my post here before. https://www.pedelecs.co.uk/forum/threads/erider-moped-help.41759/#post-623888 But thanks anyway for your reply its most appreciated believe me. same with anyone's help here. also its drum brakes, and it wasn't those. But I've...

Ok Before I start I dont want any funny comments. But after 3 months of fixing my moped 1st day on the road today, it went about less than 1/4 of a mile. and speedo went down to 10 Km/h dam I thought what's wrong now. but when you push moped its like a brake binding as you push it, then it...

what you mean open battery case then change where it plugs into lead Oh I can see what you mean now so the socket is other way, bloody hell wheeliepete never thought of doing that. saves getting a lead. it will be much better too thank you so much

Hi I need to find a male to female IEC extension lead but the female end what plugs into battery as you can see needs to be angled opposite way, like a L shape as atm its a reversed L shape and its not good as bending lead. most I have looked for are not L shapes at female end

Well guys at long last after 3 months of fixing the moped. its all done, I'm just waiting now for the new thumb throttle to arrive so I can fit that too. I tell you what the bloody panel took some fitting back. but as they say if it came off it has to go back. tidied up some places where there...

I may have fixed it Nealh as it seems to be a loose connector where it plugs into, so will tighten it up a bit. I just got front panel back on 6 screws and bugger me left indicator wasn’t blinking. So had to remove panel again. but thanks for the info. How do I check voltage supply for it...

would anyone here knows what this indicator lead is called, Ive checked wiring for continuity all seems ok, even tried another bulb still dont blink constant, stops then shake wire it go so think maybe the bulb holder is faulty

Only found 1 bit of chain link, can I dam find the other part, so just ordered a new link, as I can be getting on with tidying up stuff while I wait. I've got some soldering to do, plus fit panels back https://www.ebay.co.uk/itm/284598606955 EDIT: silly me found another part of chain link...

it’s not a bolt it’s a chain link lol but it’s gotta be behind the furniture. As no where near moped I just thought it had dropped below moped but I’m not that lucky whats a throttle bolt anyway

Yeah done that. Next step is moving bloody furniture. I thought it has to be under the moped. Nar no such luck. It’s not where I’ve looked. So it’s gotta be behind furniture

Yeah this bloody covid but funny you don’t hear from where it all started in wuhan they kept that quiet sorry you caught covid my brother and his girlfriend caught it too. Plus one of my nieces. I’ve started today putting back wheel on but lost the dam link to the chain it pinged off and...

Thanks Nealh yes the bloody big C sorry about your sis yeah and even though it’s 10 yrs 8months I bet you still think it was yesterday. My sister was living in a care home. And since her death it’s now been closed plus another 3 more owned by same company. I think probably a cleaner brought...

No its fine you wont be hearing no more, Just glad after 3 dam months its all fixed. But I didn't have a clue what Phase or sensor wires where, or loads of meter tests I've done with all the help on here, as I couldn't have done it without none of you. and a special thanks to Nealh &...