Search results

Back again, Tried the hall and phase wiring diagrams that d8veh supplied but could`nt get anything to work except maybe a little bump, i came across the 36 version check and tried it. Best result no. 34 Got variable results, motor running but not wheel, very noisy and mostly LCD showing motor...

ok, thanks for help, will give it a go, by the way I am expecting a KU65 controller from bms battery soon, do you think I should wait and try that if they sort it out automatically. ROB

voltage is set, not wheel size yet, d8veh I thought using the motor controller tester would sort out the hall wires. and if the wheel turns in reverse, to change positions of the phase wires. I will print out the diagram you have inserted and have a try, but I have one wire spare. ROB

it is not a ku controller, its from a kit I bought of ebay MATEEM I had waited 9 weeks for it from bms battery and never came, I have re ordered one waiting for it to come ROB

I may as well start here, as this is where i finished off. I have a motor and controller tester, and tested the phase and hall wires, as explained before the Giant Suede has six hall wires, red, black, yellow, blue, orange and pink on the controller and new controller has only five Coupled up to...

ok thank you both ROB

I am fitting a pas sensor and disk, I have read d8veh`s article on this, and I know it is quite simple. I am fitting it on the left side, and d8veh mentions turning the sensor by unscrewing it, I do not think this one can be turned if required, as it has a led light on it. I assume it is fitted...

I have all the wire ,wired up individually, ie that is the Halls , phase, and power, once I find out the correct order I will wire them up proper. I will try what you suggest first. thanks for all your help, i am getting better at photography. ROB

what you call the front I thought was the back, thanks for your help, you must be getting frustrated. ROB

I feel like the village idiot here try this

for every photo I send I have taken 10, camera is useless try this one this is upside down, the other right way up

I had to use a different camera, I think it should be ok, you can see what caused the controller to fail the ruptured copper in the top left. ROB

try this one, should be ok, one of the back next

took this through a micro- scope, I can see every thing perfect when blown up hall wires are from the left, blue, pink, yellow,black, orange and red. I think blue is the odd man out ROB

four of these wires are pretty obvious where they go, the fifth I am quite confident, it is why is there a sixth, that's all I asked, must be hundreds of members who dismantled controllers in the past, I never heard of ebikes before xmas, but I will get it going, don`t need all this harassment...

I must have crap cameras, these are a bit blurred, I am sorry but I tried my best.

another camera is directly above ROB

I am not a photographer, this is from another camera, its the best I`ve got the other photos blow up to about I ft x 1ft if this is no good I will have to forget it, and try a bit of experimenting, on the other photos I can see every spot ROB