Search results

now £430.00

I go on holiday tomorrow morning, for a month, I will get in touch with you when I return. thanks for help ROB

I do not know that is why I a inquiring, one of those might work but I want to be certain. thank you ROB

NO DAVE you did not sell me the controller I bought a kit on ebay and was going to fit it on a Giant suede, but I could not get it to work, you suggested a ku65 which worked great on the Giant. having this kit I was fitting it on the claud butler, I was only trying to find out what controller...

I have fitted a Q100 motor to a claud butler trecker I have, I had previously fitted this controller to a bike you helped me with, but the controller never seemed to work properly, so I swapped it with a ku65 controller and it worked perfect. it is now fitted to the claud butler and still not...

any one know what controller to use with this LCD,photo from forum ROB

DONCASTER< SOUTH YORKSHIRE

I bought this for my wife xmas 2013, she has only ridden it for about 15 miles or less. She is only 4ft 11 ins and 8 stone, I am selling it to purchase another smaller Kudos for her, which will be more suitable, this one will suit a man or woman, above 5ft 4 ins. would be great for caravan or...

I thought I must be doing some thing stupid, I have had it assembled, then taken apart, could not understand, as I knew the measurement was right for 3x., so I am one cross over wrong. thank you d8veh. ROB

I am threading a 700mm rim, to a Q100 motor, I measured the rim with 2 x 200 mm spokes connected with a rubber band, spokes screwed fully into nipples, 36 spokes to be fitted, 3x pattern the ERD was 610mm, hub diam 108mm, hub rim to centre 21mm, spoke length using Wheelpro spoke table was...

I am at DN3 thanks ROB

GIANT SUEDE now up and running like a rocket, running sensorless, without hall wires connected. PAS and throttle working perfect, nice to see an old bike looking so good and running so well, thanks for all the help, especially d8veh. I had never seen an ebike a few months ago, so I have learned...

motor running ok now without hall wires, I want to fit a hidden wire brake sensor, does it connect to the red, black and yellow wire, on the controller and if so, the wires for the hwbs are coloured red, blue and yellow. Is it red to red, yellow to yellow, and blue to black, I was thinking the...

ok I will try that, seem to be getting somewhere now. thanks for all your help, ROB

I went through the P parameters p1--p12 and could not find any thing wrong, so maybe some one will have one of these LCD`s and give some advice. In the meantime I have uncoupled the controller, and fitted the KU65 one. the throttle worked perfect as soon as I switched the led on, only thing the...

another ROB the little connector with the red couplers is something I made up for switching wire during testing hall wire sequence

thanks for the advice d8veh,i will try every thing you have suggested I have down loaded a manual but it does not mention you have to pedal to work on throttle, I will give that a try, the ku65, I am changing some of the connections for better ones, if I cannot get this one to work I will try...

I require a bit of help with this Giant Suede that i am trying to update a bit with a kit bought off ebay. I am fitting the controller onto the seat pillar, in a plastic box made for controllers. The controller is 36volt 250w—350w 6 mosfet with LCD 861 meter, twelve pole PAS and half twist...

anyone help. ROB

pressing the CUR button also stops the motor, speed is much more than 6 mph, just throttle and PAS to sort ROB