Search results

How is the new swx02 compared with the bigger bafang bpm motor with same no load speed at same current when it comes to torque and overheating D8veh? From what I understand from woosh post the swx02 is 4kg so about same weight and same gearing butt smaller diameter/torque.But maybe wider stator...

Anybody had any overheating problems with the oxygen motor on hill climbing?

Hi, will you have this 48olt 250w kit in bigger wheels anytime soon,and can you sell the kit without battery?

The bosch cx is a super motor.But as a comuter in Norway with lots of hills I sometimes miss the extra torque to keep the speed more effortlessy at 25kmh up the hills.Of course I could go slower,but thats not what I want.When the legal speed is 25kmh I want keep the average speed close to that.A...

That was a stupid comparison.So now suddenly we want low power ebikes with small batteries.

I wouldn buy anything right now.I would wait for the new bafang M-500 motor with 95nm.There is also many other new motors coming this year with around 100nm .And also bigger batteries

I have an Q128H 800 motor 36v 201 rpm but it is about 260rpm.But that is the newest Q128H 800w version from bms battery.Didnt that motor change the motor housing?

Do you think the torque will be about the same as the q128c D8veh?

I wonder how this motor compares to the q128c.It has a lower gear ratio but it has a bigger motor (outrunner vs inrunner) From what I read at pedelecforum it is very quiet.I belive this motor is as good as the q128c and legal...

https://www.aliexpress.com/store/product/MXUS-250W-24V-36V-48V-Electric-Bicycle-Conversion-Kit-Gear-Motor-For-16inch-28inch-Rear-Wheel/3194078_32844507168.html?spm=2114.12010612.0.0.474aa361XZaS0w

i have the q128c 201 RPM 36volt version in a 700wheel with 48v 18 amp and can pedal it to ca 43 kmh.

https://www.alibaba.com/product-detail/2017-MXUS-new-design-XF18-high_60676984497.html

yes it is ok:)

havent seen that kit on woosh site before.Nice kit

It was the p1 parameter

After more thinking I belive it has to be the 250w Ezee motor.it comes with a certificate. The Xiongda 48v vould be the best but Bonnie told me before she could mark the motors 48v 250w .but they only had an En 15194 certificate for the 24/36 volt versions. also the Bafang swx02 should be...

I have had the same problem with 3 diffrent motors.I changed them controller and motor is okey.i suspect its because I dont use the gear enough and that makes it hard on the controller