Search results

How much slower than a road bike am I? I want to be as fast as a road bike on the flat ideally.

Hey so basicly im enjoying my cyclotricity 250w kit but basicly find it a bit weak and slow for what I want to be doing. Is it possible to take a wheel from another kit and swap it still using the same controller, battery and LCD that cyclotricity provided. Or do controllers only work with each...

Hey so I currently ride at about 18-20 MPH on my ebike on the flat. My motor cuts out at 15.5 mph is this ok?

Hey I swapped the fork out for one with slightly longer reach this allowed me to fit my dual calliper. It now stops like a dream for me. I kinda like the vintage look and feel of the bike and a straight fork would look wierd. Saying that I have loads of inner tube and wires all over the place...

Heres pictures of my bike. It is a carbolite 103 I assume the fork is the same its just got a puegeot logo on the front.

So I press and hold the up and down for 3 seconds to get to the settings. Then I press and hold them again?

I run a 700c wheel if I changed the wheel size to say 24 inch would my speed be higher as the sensor detects rotations of the motor?

Hey so I have the LCD for the cylotricity front wheel kit. I know I can acces the programming menu by pressing both keys. So how do I set the max speed to 32 km/h which I hear is the max speed this kit can do. It accelerates like a rocket and then just slows down. I feel like my kit is...

Do disc brake forks even come in threaded quill stem form?

Do you think a modern set of road levers would make my brakes stronger than my vintage ones?

Unfortunatly those brakes dont come in drop bar style as far as im aware.

weinmann center pull callipers. Can only take calipurs in fork.

I use a 250W frontdrive kit from cyclotricity on my vintage puegeot 10 speed. What brakes are you running? Single pull callipurs are weak for ebike.

Hey so my kit (Cyclotricity 250W front) is working on myebike and its runs fine. However I wasn't able to install my new dual callipur brakes to the bike as the reach on them is way to long. What I have found is that these brakes which did fine before and I dont seam to be going that much faster...

I have about 3 inches of solid wire wrapped near the handlebars.

Hey so I finally got the cyclotricity 250W front hub installed. However they gave me way to much wire so my bike that I kinda converted cos I liked the look of vintage puegeots looks like a complete mess of wires everywhere. Are there any bags or something that I can place the wires in to make...

Ok I got it working not sure what I did but musta been that something wasn't plugged tight enough in.

LCD does not switch on when I plug it in. Is the ignition wire one the red and black wires.

Its all brand new.

Hey so I plugged this 36v battery into my 250w kit and set it all up. However the battery is not powering the kit. Pedelec doesnt move wheel and lcd screen doesnt switch on so I would assume its a battery problem. When I touch the battery button it lifhts up showing how much power the...