battery wont power cyclotricity kit

[flik9999]

Hey so I plugged this 36v battery into my 250w kit and set it all up. However the battery is not powering the kit.

Pedelec doesnt move wheel and lcd screen doesnt switch on so I would assume its a battery problem.

When I touch the battery button it lifhts up showing how much power the battery has. Key doesnt seam to do anything but lock the battery inplace

I plugged both lcd abd wheel in to check so its not a wheel problem.

 

[Fordulike]

Hey so I plugged this 36v battery into my 250w kit and set it all up. However the battery is not powering the kit.

Pedelec doesnt move wheel and lcd screen doesnt switch on so I would assume its a battery problem.

When I touch the battery button it lifhts up showing how much power the battery has. Key doesnt seam to do anything but lock the battery inplace

I plugged both lcd abd wheel in to check so its not a wheel problem.

Is the kit and battery new?
Got any links to mentioned kit?

 

[flik9999]

Its all brand new.

 

[Deleted member 4366]

Does the LCD switch on? Do you have the LCD? Without the LCD, you need to connect the ignition wire.

Perhaps you should start by telling us exactly what you have.

 

[flik9999]

LCD does not switch on when I plug it in. Is the ignition wire one the red and black wires.

 

[Nealh]

Check the battery output with volt meter should be 41.5 - 42v charged, if this is ok check the fuse. Modern ones tend to be accessible from outside the casing. Make sure you have switched the battery on, sounds silly but its been done.

 

[flik9999]

Ok I got it working not sure what I did but musta been that something wasn't plugged tight enough in.