Search results

hm... i have some plumb here from sylvesterßs "plumb - casting" maybe i can use the balsaholz and the sand to make a plate from plumb ;) however: we have managed to make some technical drawings so far ;) ;) besides: your German is very good, for sure lot better than my English

hmm.. Variante 1 ist zu teuer :( Variante 2: da feil ich wohl 2 Wochen dran rum, oder ? kenn mich mit Metallen nicht so aus.. ich habs mehr mit Balsaholz und aufgrund meiner langjährigen Balasa-Holz-Erfahrung kann ich sagen: so eine Drehmoment-Platte würde aus Balsaholz nicht halten ;)

yeah.. question is, if it is easy to make it when it is closed... maybe it has to be done in 2 parts.. so its easier to machine it, and afterwards screw the two parts together, quasi a "door" for the slot

this idea came to my mind, first time i saw the torque-washer and my fork.. question: would it be strong enough, when the plate for the 10mm slot is on one side (of the slot) open ?? i mean: thats the same like the fork is made.. but otherwise making would me much harder i think..

Tiberius, thats an idea i had too... two problems: 1.) how make a 10mm Slot ? (i have a fretsaw at home ;) ) ok.. i have a friend who can maybe do that maybe he can "erode" it (i have not understood it 100%: its a fine conductor, running like a saw but with electricity... the steel is...

thx.. so iam a little more pacified... Chris: that sounds easy, to bend the fork apart the way you do it... wondering why this didn´t came to my mind... at least, i didn´t want to bend it permanently, because i was afraid overstressing the fork i mean: when i want to bring it from 10cm to...

Hello again... so, i managed to make some pictures.. sorry about the Quality, but the display is broken on that camera, so i make pictures without knowing the settings of the camera it is a steelfork, about 15-16 years old here you see the torque-washer -> the little torque-arm does...

hmm.. where can i get such an "Torque-arm" ? from which company ?

here a little, very bad drawing: the axel does not slipp in fare enough what do you suggest.. more pressure (press it in) or gentle hammering on the axel does not help its maybe 1/2mm that causes the problem.. i think i will have to grind the fork

my English is not that good, but i think this sounds a little bit funny.. ;) hmm... maybe i should go to my girlfriend instead of sitting here in front of the internet.. ;) for getting the wheel deeper in the fork-spacing ( i don´t know how to call it): i have no camera here in the...

first problem: motor is ~11,5cm wide, the steel fork only 10cm that does not seem much, but man: try to bend it apard and insert the wheel with only 2 hands.. impossible tried it with the help of my girlfriend -> impossible as well (with the wheel inside, iam not strong enough to bend the fork...

looks interesting, this bike.. modern, sporty (3.0 wide wheels)... not like the "Stadt-Radl" here in vienna you can rent (first 2 hours free, than 1euro each hour) here a picture of "our" bikes.. http://www.wien.gv.at/ma53/rkfoto/2003/493g.jpg at the start of the project they were...

argh.. i wrote the above yesterday.. and forgot to send it.... @flecc: you mean this: ZERO MOTORCYCLES || Electric Motorcycles || High Performance 17000Watt Power 58Volt and 35Ah battery 40miles range price: cheaper than some of the optibikes... or this: Home Page 45mph max...

hmm.. in Germany there are already some few electric bicycles which are allowed to to go up to 45km/h you need a plate (does not cost much) and are not allowed to go on a bicycle-drive-way anymore depends on where you live: here in vienna with all the bicycle-drive-ways it would be a pitty not...

hi... very slow progress.. (exam stress, my bike standing in my homeland and not with me here in vienna) however: i have brought my old bike to vienna yesterday it has a steelfork.. the description of the electric motor says: its for 100mm forks.. well: i dismounted my wheel from...

for weight: 36V and 10Ah -> it says 3,5kg / 7,72lb is that with balancer-unit or without ? for Lipos: with Thunderpower Prolites you get a pack with 37Volt and 18Ah weighting also only 3,5kg ;) but lifetime is maybe not as long as with Fepo4 for lifetime: there are Lithium...

i have prepared this weekend my cells for installing in a 900ml bottle.. 36Volt, 4200mah, 1,29kg the cells, capable of 54A continouse power and 90A for 15seconds long in the bottle is even still room to make a balancing-connector inside (also with this cells i would not need) the only...

hey.. looks great in the rear wheel... very "stealthy" you could be mistaken and thinking its a hub-gear-box and not a motor now the controller in a little bag under the seat and the battery in a bottle and nowbody would notice its an ebike...

hey... yes, before i ordered the bike and asked many questions he from the shop send me this picture: but when i ordered he asked me: "standard-fork or suspension fork" i have a standard-fork... and now the parts are missing in the kit and i thought that it maybe is because of my...

were i bought they sold it in two versions: 24V and 36V 24V -> shutoff at 17V 36V -> shutoff at 31V i chose the 24V Version because its the same controller, only programmed with lower cut-off-voltage so i can use also smaller batteries lying around.. its not problem to use bigger batteries...