Search results

The cable is easy to find. It's on Ebay, Amazon, Aliexpress and everywhere else, but you won't find the cable with the Suntour connector unless you can find a used one on Ebay. All you need to do is solder the nine wires and heatshrink them. How could the dog chew the cable when it's all tied...

You get that code when there's a problem with the motor cable, so you must have damaged something when you fitted the torque arms. Did you check the motor cable in that area? Is there any chance that those bare connections touched while yoy gave the motor power?

If any of those bare wires touched when you were trying to run the motor, you would probably blow a hall sensor in the motor. You need to test them now with a meter.

The power comes from the controller. If it's a 30A controller, you should see 30A, but if you only see 15A, then something is wrong with the controller, probably an unsoldered shunt. If you get 30A, but the motor is not giving enough power, we have to find out why, like incorrect timing or...

What do you think about this. I'd like to know a bit more: https://x.com/i/status/1855206734807040243

Let's say you had a mental breakdown and decided that the Russians needed to take a beating, and you therefore decided to go and get the Ukranians some help. Why would you go to Afganistan? What's going to happen when you jump off the plane and go to the nearest bar to ask if there are any ISIS...

With the power you're getting, I doubt that you're going to overload the wires in the wattmeter. All you need to do is confirm the current. You do that by spinning up the wheel with full throttle, then use the brake to slow it down while you keep the full power on. It only takes a couple of...

P5 doesn't do anything to the motor. It's a simple damping coefficient for the battery display. Keep it round about 15 if you want to use the battery meter as a fuel guage.

yes, the one marked in yellow is the adjuster scre. It moves the fixed pad closer to and further away from the disc. You need it as close as possible without touching. You can remove those two screws if you can to get the pads in if you have to. There's a bit of a knack to getting the pads in...

Did you consider buying a 110NM TSDZ8 from Woosh? They're legal, so one less thing to worry about

Two things I can think of: I don't see any wiring diagram or explanation of the wires. Is one connector for a three speed switch, limiter or something like that? Secondly, I've had a controller, where it had two shunts and one came unsoldered so it only gave half the current. It would be nice...

https://www.yosepower.co.uk/products/36v15-6ah-silver-fish-e-bike-li-ion-battery-usb

I found this one that looks very similar. You'd have to measure yours to see whether it's the same...

The power should cut off completely. There are a couple of things that come to mind. One is the C4 setting.which I think can override the speed limit in one case. Secondly is the way the speed display and control work. It uses the speed sensor to display the speed, but it uses the hall sensors...

You obviously don't know the facts. He didn't pay anything. The payment came from a second rate lawyer, Michael Cohen, who mortgaged his house to get the $130k, then he slipped in false bills to the Trump campaign to get his money back. He was subsequently convicted of fraud and other offences...

The guy in the bushes had a Facebook page where he talked about his job of travelling to Afganistan to recruit ISIS fighters to fight in Ukraine against the Russians. That doesn't sound like you're average deranged loser to me. The other guy that was killed had strong links to BlackRock. Maybe...

I think you're looking for the wrong things. You have some idea in your mind about what you think is best, though you haven't tried anything. If I were you, I'd go for a quick and simple solution. Just get a cheap catalogue MTB with 26" wheels, a triangle frame and disc brakes. Add a Q100 motor...

It would help a lot if you told us which controller you have.

There was absolutely no definitive evidence for any of those things. They're just made up stories, where facts have been adjusted. You've been reading too much MSM again. If he manages to live long enough to get into office, the truth will come out and you'll see I'm right.

Rinos have no power over him this time and they're not going to be able to do continuous impeachments to tie him up. It's going to be fiery. I can't wait. To be honest, I'll be surprised if he makes it to January. I hope he does, but they've got too much to lose. Mind you, I didn't think he was...