Search results

I may just bite the bullet and spend the £20 on a 3 pin charger just to rule out the whole charger issue.

Crikey I don’t think I have the required skillset to perform such an operation.

Ok so how do I check cell banks for voltage? What could cause the BMS to get fried?

Just measured it at 01.0v it’s not been charged for months

This is the charger

Ok I can give this a shot so I connect the multimeter to the + and - pin connections on the battery and then power the battery on is that right?

The pics in #12 is of the battery and the charging dock which connects to a power block. The battery looks like it allows 2 ways to charge it one way is through the charging dock with the 6 pins shown in #12 and the second way to charge it is through this 3 pin connector. I hope that makes sense.

Can anyone recommend a replacement charger looks like I need a 3 pin charger

Yes the multimeter was set to 200v DC, also the clicking noise only occurs when the battery is connected. The plug fuse is good i tested with a different power cable too. I could open up the charger box and see if there is a fuse.

Thanks for the help. I also used this link The multi meter is returning 0 when i test the charger unit. Would that imply the charger unit is broken and I would need to source another charger rather than the battery?

ok so is anyone able to assist on how I go about testing the charger unit with a multi meter? Like what settings do i need to use on the multi meter?

I’ve made two additional observations 1. The clicking sound only occurs when I connect the charger to the battery. 2. When I press the power button on the battery it shows 3 solid blue bars and a 4th blinking bar (not sure what that means)

Good spot mate I didn’t notice I’ll dig out the multi meter and check this out (secretly praying it’s the charger at fault and not the battery)

This is the charger

I’m tempted to leave it on overnight and check the outcome in the morning

I’ll get the multi meter out and check this which points would I check as it’s one of those wide attachments with about 10 pins.

I’ll have to check I can’t imagine it’s charged at all I suspect it’s completely discharged and empty but I’ll double check this

Hi Community I have dusted off my bike after a 6 month break and I left the battery on the bike this morning I detached the battery and went to charge it and the charger it self is showing a green light (which usually means charging complete) and I can hear a clicking sound coming from the...

Looking for some guidance I am on the middle of moving house so all my tools are packed away so removing handle bar grips is becoming a painful task! anyone know where I can get these from? Or how to fabricate this using off the shelf bits! I’m trying to work out ways of attaching the throttle...

That is a brilliant setup! Like a datacentre in your home! I’m struggling to get the handle bar grips off!! happy to pay you if you can ship me a 3D printed case