Search results

This is brilliant, I should be ready with cables and photos by end of the week I'll take some pictures and post on here, some quick questions. The self blink test would I do this either with power to the Arduino with USB power or bike battery power? Or does it not matter for this test.

Going back to the original diagram I now have 4 cables (the addition of the torque cable) running into the Arduino board which input (Digital/Analog) would this cable be plugged into? And I now also have an extra cable input required for the Controller (4 cables not 3 as it was accepting the...

Yes I will attempt this but first i need to source some connectors and appropriate wires so I don't have to cut any wires already connected to the controller.

So I had a chance to get into the Controller box of my bike last night and it turns out the PAS connector is actually 4 wires not 3! Its Black/White/Yellow/Green how can I make this work with the circuitry designed from the 3 wire connection. Is that extra wire the torque sensor? I saw the post...

Something I wanted to double check here is where is the power coming from for the Arduino? Also for the wiring I was thinking of purchasing some 3 pin extension cables that I will wire into the Arduino then have a clean plug and play connection to the Arduino, would that work in this case? The...

Any ideas on the connectors? Ideally i want a plug and play system without cutting any existing wiring. So I want to use connectors to plug in the PAS / Controller / Throttle. I think I'm ok with the throttle I believe its a 3pin connector easily available from ebay. But the connectors that...

I want to give this a try it looks pretty straight forward I’m competent with soldering/wiring/coding however I just don’t know where to source the right cables anyone know where to buy 1) throttle 2) cable to feed the controller 3) cable to accept the pas input cable

Thanks for the excellent advice and I have concluded that I’ll just add a throttle however after looking at the thread on adding a throttle it doesn’t seem too complicated just need to know where to source the cables I’ll ask on the other thread.

I have been doing great with my Carrera Vengeance ebike for a while now and have recently been looking at adding a ebike conversion for the front wheel, so essentially both Front and Rear tyres will be motorised. My query is that I don't want to add a second battery to the bike and was...

Are you able to share where you purchased the 1000w front wheel kit from? Thanks!