Short answer people lie. They tell untruths and half truths . The real truth is more nuanced.Why do I keep seeing adverts for 'street legal in europe' 750 watt ebikes when the limit is 250? Or is it just the UK that it's 250?
600W in Austria!It's 250 watts throughout the EU and in many other countries, including Japan, China where it's being phased in, Switzerland, Norway, Iceland and in Australian federal law.
The main exceptions are US federal law which is 750 watts, though that is often varied by state laws, and New Zealand where it's 300 watts.
.
But that's not a pedelec. Austria is in the EU whch has a mandatory 250 watts rating limit for all countries, embodied in the 168/2013 Two and Three Wheeler Type Approval Regulations.600W in Austria!
That's correct, though the article isn't fully up to date.this is from wikipedia
In Austria, S-Pedelecs (power-assisted pedalling up to 45 km/h) are not classified as bicycles. Whether they lit at best as moped According to Article 1 paragraph 2. A) Directive 2002/24/EC (or as motorbike § 2 Abs 1 line 14 KFG) are typable and registered as a motor vehicle can be driven, so far
It has to be able to run for 1 hour at 250 W continuous power with 2 degree Kelvin variation in temperature to meet EN15194 norms. (paragraph 4.2.7)If you focus on this one point:
"has a maximum continuous rated power which does not exceed 250 watts;”
Then in theory you can have a motor that can peak at 1000W but if it has a continuous rating of 250W then it's legal.
Bosch CX Motors we all know are fully road legal but have a peak way over 250W. It's just their continuous rating that is 250w.
This is the same for many motors available. However some manufacturers will take full advantage of this and interpret it how suits them.
Bottom line is when manufacturers are marketing their product sometimes you have to take the figures with a pinch of salt. With a little research you can normally find out if they are giving you the continuous or peak wattage. If it's 750W continuous then yeah, it doesn't meet regulations.
Just to clarify, is that a maximum or minimum allowance of a 2 degree Kelvin variation in temperature?It has to be able to run for 1 hour at 250 W continuous power with 2 degree Kelvin variation in temperature to meet EN15194 norms. (paragraph 4.2.7)
"Better" at what? Quite simply, it's all about suitability.Its been said before that 1000 watt direct drive motors at slow speed have very poor torque. These are the norm in the mini mopeds that are sold widely in Asia,you see hundreds at every major junction,the riders pedal furiously to get them up to speed. Once they hit about 12 mph it is easy to get them up to 20 mph and maintain that speed,they continue to gather speed slowly which makes them dangerous because the rider is desperate to maintain momentum so they weave within the traffic and go round sharp corners too fast,they dont have very good brakes,lots of accidents.
Overal a 250 watt geared motor is better.
KudosDave