Skip to content
View in the app

A better way to browse. Learn more.

Pedelecs Electric Bike Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need Help To Derestrict Ezee Torq

Featured Replies

PLEASE, may someone of u help me how can i derestrict my ezee torq??

if you have photographies, it would help a lot.

thank you

  • Replies 59
  • Views 24.3k
  • Created
  • Last Reply

Top Posters In This Topic

If you remove the battery Tranki, then turn the bike upside down and look just behind the bottom bracket you'll see some wiring harnesses under the battery area.

 

On one of the bundled cables there is a single ended short stub sticking out. If you remove the insulation from that, you'll find a connector on the end. If you unplug that, the limiter is off. It's best to use some insulating tape afterwards to protect the ends against damp.

 

The stub is usually tucked under the other cables so you'll need to unearth them a bit, and you might have to cut a tie-wrap to do that.

 

Sorry no photo, but as it's usually buried under the other cables, it's not easily demonstrated pictorially.

 

I've now added fully illustrated details on doing this in my website here.

.

Edited by flecc

Just to clarify from a legal standpoint that if you de-restrict your Torq, you should only ride it in this mode on private land with the permission of the landowner i.e. not on a public highway.
  • 4 months later...

Torq 2008

 

I've had my 2008 model for a couple of weeks now and been happily riding it to work with a max speed of 15.5mph.

 

This weekend I had the opportunity to take it off road so I set about derestricting it. I found the red shrink and cut it off - that's when I first started to wonder. Instead of having a connector to disconnect, there were two connectors already apart.

 

Now disconnecting things is not usually risky so I was happy with the instructions but plugging in something that wasn't plugged in before requires a bit more courage - was I going to blow up the controller or do some other irreversible damage?

 

Being a brave sole I plugged it in anyway and went off for a ride. I could immediately feel the difference - I thought the battery was flat but no - my new bike now had a top speed of 12.5mph!

 

I returned home and unplugged again - normal service was resumed - except that I bought a bike which was advertised as being able, in suitable circumstances, to go 22mph and it can't.

 

50cycles are still advertising 2008 Torq's as being able to be derestricted 'cos I suspect they haven't realised that there has been a pretty fundamental change to the design. But I for one make my choice partly on that basis. Beware if you are thinking the same way.

Hello Barney. You could check this with 50cycles who can take it up with eZeebike, since there may be another solution with the new wiring harness.

 

Alternatively you could mail eZeebike direct, you'll find them very helpful usually:

 

Contact English speaking Mr Wai Won Ching on ezeebike@gmail.com

.

Thanks flecc I'll try Ezee and post their reply.

 

I suspect the basis of this may lie in the fact that the 2008 Torq has a "new more torquey motor". As I understand it, the restrictor was there because the motor was designed for a smaller wheel and so needed restriction. With a new motor, designed for this size of wheel the restriction is probably unneccessary and hence probably there will be nothing I can do.

 

Barny

Edited by barneyd

You may be right that it is the new motor. Do you think that they have two motor variations 250W for the EU and 350W for the US? It is possible that the 250W version is geared for the maximum 25 kph legal limit but it is certainly a marketing blunder as I sure there are a great number of people who only buy it because of the high top speed. It would suit me as the old over geared Torq was less than satisfactory when restricted and personally I prefer to stay legal(ish).

 

When you have the limiter in (wires connected) is it smooth up to the cut off point or does it cut in and out a bit - this would give a bit of clue as I suspect the original Torq controller was well matched to the original motor.

 

I suspect the basis of this may lie in the fact that the 2008 Torq has a "new more torquey motor". As I understand it, the restrictor was there because the motor was designed for a smaller wheel and so needed restriction. With a new motor, designed for this size of wheel the restriction is probably unneccessary and hence probably there will be nothing I can do.

 

Barny

 

That's just possible, but it wouldn't suit the USA where this model was launched first. I'm going to be interested in the reply you get from eZeebike if you could let us know.

.

According to the Nyce wheels website, the 350W US version tops out at 20mph, so it may be that there are indeed two versions of the motor. After all, originally the restrictor was put in as a bit of a bodge so one motor could suit two markets. Two motors variants would be a better solution if they had been properly marketed as such, but it will obviously upset those who want to ride at the "off road" speed (especially if you have already bought it expecting 22mph).

Barney, are there two wires into one of the two connectors you saw?

 

If so, investigate them further. One might be looped back into the other in that connector, and if so, disconnect it and try again.

.

Is the law actually very clear on de-restricted bikes/ From what I've seen, nobody seems to know what's legal and what isn't......

Edited by jimmyengland1000

Early reports of the eZee motor kit from ebikes.ca suggest the motor does give about 20mph in 26" wheels on a new 37V eZee lithium batt, so nearer 22mph in 28" wheels.

 

The controller current limit apears to be the same 16A as the UK Torq trekking, so unless the Canadian/US motor's internal gearing is higher than the UK one, the speeds should be the same - so long as the UK limiter can be removed. I could understand a lower wattage rating i.e. 250 vs 350W if the same motor had a limiter on power in the UK, but not if its the same motor & power but geared for a lower speed?? I know that lower speed would mean it runs at lower 'continuous power', and would suit the legal requirements for UK/EU, but it makes no sense in terms of the same motor having 2 different power ratings!

 

On legality, as far as I know Jimmy bikes should phase down power assist up to 15mph maximum to be road legal, but can be legally used derestricted offroad/on private roads :).

 

Stuart.

Edited by coops

Hi All

 

When I got my 2008 Torq, I asked 50 Cycles if they could de-restrict it for me. They said they could not but that it was easy to do. This would imply that they believe the bike is capable of being de-restricted and going faster! I have no wish to de-restrict at the moment as i'm still getting a feel for the bike and don't need too much speed in the dark. Come the summer though, I will want access to the extra juice and will be mightily miffed if I have purchased a bike which is advertised as - 'Max Speed 15.5 mph (UK legal limit) Can be derestricted to reach 22mph'. Currently I have faith that the good folk of 50 cycles are not telling porkies. Has anyone sought clarification yet if not perhaps I could give them a call.

 

Paul

Give them a call Paul. They can be genuinely caught out if something on the bikes changes due to availability difficulties at manufacture, not uncommon on bikes. They'll be able to look at a stock one to check the latest details to derestrict.

.

Barney, are there two wires into one of the two connectors you saw?

 

If so, investigate them further. One might be looped back into the other in that connector, and if so, disconnect it and try again.

.

 

Flecc,

 

There are two wires in one pin of the first connector but it looks like this is only a joint. One goes to the controller, the other to the loose connector. The loose connector has only one pin, which mates with the other (single) wire in the first connector to give the restriction.

 

Barny

I had two replies to my enquiries today:

 

First from eZee:

 

Dear Barny ,

 

Sorry we decided to keep the bikes to the legal speed limit of 25 kph.

 

I hope 50cycle would have the decency to have told you that very clearly before you oaid for the bike.

 

But anyway the new Torq has far more power (much more torque) than the old model.

 

Best regards

W W Ching

 

The second from 50cycles

 

Hi Barny,

It would seem as if the spec has changed on the 2008 models. I have emailed our manufacturer and am currently awaiting his response.

Regards

Lloyd

 

I note that they have removed the note about the derestricted speed from their website.

 

Looks like the UK/EU version is already as quick as it can be.

Is the law actually very clear on de-restricted bikes/ From what I've seen, nobody seems to know what's legal and what isn't......

 

I'm no lawyer but the way I read it is this:

 

If the bike complies with the EAPC regulations (max speed 25kph among others) then it is not a motor vehicle within the Road Traffic Act.

 

Since the Road Traffic Act requires insurance, driving licence, tax, MOT etc for motor vehicles then I guess a derestricted bike would require all of the above. As such, the act of riding the bike probably isn't illegal but to do so without a licence, tax or insurance probably is.

 

That might even mean that you could end up with points on your car licence for riding your bike!

Thanks for the information Barney, I suspected that this might be the case.

 

Unfortunately communications between eZee and 50cycles have had not been at their best for a little while.

 

Understandably, 50cycles want stable specifications for at least a season at a time, while eZee, up against the part availability problem that afflicts the cycle industry can't promise that and variations occur.

 

Of course the constant changes should be notified to all agents on every occasion, but that's easier said than done and things can get missed.

 

At least we now know how the extra torque was achieved, by internally gearing down the hub motor. Just making it a 24" wheel bike would have done roughly the same of course, since the motor was designed for a smaller wheel and legal speeds in the first place. :)

.

The law is perfectly clear. To avoid being classed as a motor vehicle an electric bike has to comply with a number of criteria including a maximum assisted speed of 25kph. The use of a bike which doesn't comply is using an unregistered, untaxed, uninsured, non type approved motor vehicle and 3 to 6 points per offence means an almost certain ban!

Oh dear! I can't see the new Torq selling so well now. I always thought the 'derestrict' option was a core part of the proposition. Now they've neutered the motor, will anyone want them?

 

A shame as the old Torq was something of a classic.

Gutted!!

 

I read a rather opinionated thread about 50 cycles which I think Flecc ended. I dont want to get into what is legally binding on a web page but I am somewhat annoyed that I paid £1245 for a bike and was misled as to its specificaton.

 

The bottom line is that as a retailer you should know your product. Ezee also have a responsibility in this so its a slap on the wrist all round.

 

I will comfort myself with the fact that I love my bike and get great pleasure riding it.

 

I guess the land speed record will have to wait for a while - now where did I put that nitro kit :D

I didn't end the thread you mention Stokepa31, I don't have the access or authority to do that. It was closed by the site administrator.

 

I understand you being upset about this, it's disappointing to say the least.

 

One consolation if you tackle any hills is the large gain on those. That was a big weakness with the old Torq, and it led to many selling their bikes again at quite a loss because they just weren't up to their needs in hilly areas due to the high geared motor and derailleur.

 

I think they'll all be restricted soon if the European law is fully enforced as expected.

.

I wonder if the UK Torq2s can be fitted with the same motor eZee sell in Canada then (which seems to do similar speed to the original Torq motor), if the UK motors really are limited/geared to 15mph? They must have quite some torque if they are geared for 15mph maximum rather than limited, given the peak power is over 600W gross!

 

Stuart.

Sorry flecc my mistake.

 

I cant knock the bike to be honest, its a great piece of kit and i'm sure there was no intent to deceive. one of those things I guess

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...
Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.