Hey everybody!
Last week week I bought a Fiido D2s and everything seemed to work smooth and perfect until this morning. While biking to work, in the last 100m the electric power stopped working and the LED controls began flashing. 8h later, when I had to go back home, the bike was doing the same thing, flashing LEDs, so I had to pedal the whole way.
I have no idea what is going on, as there is not much information online... the only thing I could find is the error codes in the Fiido webpage:
Fiido Throttle Error Code indicator Guide
1. Flash 2 to stop: brake failure.
2. Flash 3 to stop: DC point is abnormal.
3. Quickly flash 4 times to stop: the lower tube is broken down.
4. Quickly stop 5 times: the upper tube is broken down.
5. Flash 6 times to stop: Hall failure.
6. Flash 7 times: the phase line is faulty.
7. Flash 8 times to stop: under voltage protection.
8. Flash 9 times to stop: stall protection.
9. Flash 10 times to stop: Speed control is faulty.
10. Flash 11 times to stop: Overvoltage protection.
Mine is flashing 4 times, but I have no idea what the lower tube is...
Any ideas or suggestions?
Thank you very much!
Last week week I bought a Fiido D2s and everything seemed to work smooth and perfect until this morning. While biking to work, in the last 100m the electric power stopped working and the LED controls began flashing. 8h later, when I had to go back home, the bike was doing the same thing, flashing LEDs, so I had to pedal the whole way.
I have no idea what is going on, as there is not much information online... the only thing I could find is the error codes in the Fiido webpage:
Fiido Throttle Error Code indicator Guide
1. Flash 2 to stop: brake failure.
2. Flash 3 to stop: DC point is abnormal.
3. Quickly flash 4 times to stop: the lower tube is broken down.
4. Quickly stop 5 times: the upper tube is broken down.
5. Flash 6 times to stop: Hall failure.
6. Flash 7 times: the phase line is faulty.
7. Flash 8 times to stop: under voltage protection.
8. Flash 9 times to stop: stall protection.
9. Flash 10 times to stop: Speed control is faulty.
10. Flash 11 times to stop: Overvoltage protection.
Mine is flashing 4 times, but I have no idea what the lower tube is...
Any ideas or suggestions?
Thank you very much!