European Commission Confirmed Categorization Speed E-Bikes
Laws & Regulations
BRUSSELS, Belgium – The European Commission has used this year’s transition period for the new e-bike type-approval procedure to shed light on a number of unclear issues. One major issue was the categorization of different types of speed e-bikes.
E-bikes come under category L1e-A, ‘powered cycles’, or L1e-B, ‘two-wheel mopeds’, both allowing for pedal assist and/or throttle operated systems. – Photo Cube
On 1st January 2016, the new type-approval procedure based on Regulation 168/2013 has become effective. This procedure applies to all types of electric bicycles, except those on which you must pedal for the motor to assist up to 25 km/h with a maximum continuous rated power of 250W.
Until 31st December 2016 however, manufacturers still have a choice between the ‘old’ procedure based on Directive 2002/24 or the new one. On 1st January 2017 the new procedure becomes the only valid one. For that procedure the categorization of different types of e-bikes was still unclear. That’s settled now.
Categorization
For the categorization the main question was whether there was a difference depending on the type of propulsion. On some electric bicycles, the motor only assists on condition that the rider pedals. On other types, the motor can propel the vehicle by itself without the rider having to pedal. And there are also types which offer a combination of these two options.
Electric bicycles either come under category L1e-A, ‘powered cycles’, or L1e-B, ‘two-wheel mopeds’. For L1e-A, the motor has to be cut off at a speed of 25 km/h and the maximum continuous motor power should not exceed 1 kW. The L1e-B category is subject to a maximum design vehicle speed of 45 km/h and a maximum continuous rated power of 4 kW.
Official interpretation
With that, the Commission has now confirmed that all types of electric bicycles up to 25 km/h and 1 kW fall under L1e-A. This means that the bicycle may be equipped with a motor, which only assists provided you pedal, or with a motor that propels the bike by itself or with a combination or a choice of these systems.
There was a very strong opposition to this interpretation. Several stakeholders argued that only electric bicycles, of which the motor assists provided that the rider pedals, should have been categorized as L1e-A vehicles. They believed that bicycles that can work on the motor only should have been referred to category L1e-B.
Easier or more difficult type-approval
This was partly a philosophical discussion, partly an argumentation inspired by commercial motives. A number of type-approval requirements in L1e-A have been adapted to vehicles, which technically are much more related to bicycles then to mopeds.
This was interpreted by some stakeholders as allowing for an ‘easier’ type-approval, granting electric bicycles an advantage over for instance conventional mopeds, which would be subject to a more ‘difficult’ type-approval.
This does not hold good, the different requirements have been developed in order to better adapt the type-approval procedure to electric bicycles. The introduction of specific tests for frame and fork is a good example of an adapted requirement which has not exactly made type-approval easier for electric bicycles.
One of the member states, which was very much in favour of the interpretation to categorize all types of 25 km/h – 1 kW electric bicycles as L1e-A, was the UK, since historically the overall majority of electric bikes there have been equipped with a throttle. So far, the UK has been considering them as conventional bicycles. Therefore, in the past years, the UK has consistently argued against their categorization as L1e-B. Still as of 1st January 2017, they will have to be type-approved as L1e-A.
Reply
Report