holy **

Dom T

Esteemed Pedelecer
May 17, 2017
433
377
Shropshire
We use muc off sealent, wonder what the contents are in that. I wouldn't be happy for the DT Swiss wheels to face that type of corrosion.
Good luck Soundwave x
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
We use muc off sealent, wonder what the contents are in that. I wouldn't be happy for the DT Swiss wheels to face that type of corrosion.
Good luck Soundwave x
i would double check as if it even has traces of ammonia in it it will eat bear metal.

just have to bodge it for now with some tape :(
DSC_0162.JPG
:eek:
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507

Fat Rat

Esteemed Pedelecer
Jun 7, 2018
1,903
726
UK
the rims i have are 23mm so a bit on the skinny size these days but finding a wheel set to fit is a pita!

http://www.chainreactioncycles.com/mavic-deemax-pro-27-5-xd-12x142-mtb-wheelset-2018/rp-prod163699

http://www.chainreactioncycles.com/crank-brothers-iodine-3-mtb-wheelset/rp-prod172651

thats about it budget wise and bang goes the 2080ti:(
The mavic deemax are a nice rim a mate has them and has had no issues to date ,
Also you can have custom build rims with crc which I have done in the past ,
there wheel builders are good and I never had so much as a spoke come loose in the 7yrs I had them and they were used properly
Worth a play with the wheel builder on the site
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
none as there is only one hole for the valve, it has got behind the valve and in to the cavity and eaten it away from the inside.
upload_2018-9-21_13-5-14.jpeg
upload_2018-9-21_13-5-37.jpeg
 
  • Informative
Reactions: EddiePJ

Fat Rat

Esteemed Pedelecer
Jun 7, 2018
1,903
726
UK
B1556726-1038-438D-B7B0-6952750208F4.jpeg Mmm
I might clean my rims out and try something else :(
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
View attachment 26858 Mmm
I might clean my rims out and try something else :(
you should have 2 year warranty on the wheels but id not have that crap in my rims seeing the damage it can do.

the only thing i have never touched on my bike is the valves and looked whats happens.

and cb uk service center just sent this.
Hi


A crash repair service isn’t something which we offer on the Crank Brothers wheel range.


We would be more than happy to take a look at the wheel set and look into swapping the rim over for you but as it is outside of warranty it would be a chargeable repair.


Once we have the wheels here and have inspected which parts need replacing we can then look into getting it repaired.


For any more details let us know and we will be happy to help.


Kind regards

Customer Service Team

tel: 01933 672170


www.extrauk.co.uk
www.facebook.com/ExtraUK

so it looks like it wont be cost effective to have the rims replaced as it will cost way more than there worth.

and as there is no crash repair cb wheels are now not a option.
 
  • Informative
Reactions: Fat Rat

Fat Rat

Esteemed Pedelecer
Jun 7, 2018
1,903
726
UK
It’s got to come out then
It will be tubes for now till I figure out a safe option for alloy .
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
  • Informative
Reactions: Fat Rat

Dom T

Esteemed Pedelecer
May 17, 2017
433
377
Shropshire
Seems good options there Soundwave and checked today and muc off is also ammonia free sealant
BTW I much prefer the mavics :cool:
 
Last edited:
  • Informative
Reactions: Fat Rat

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
DSC_0166.JPG
well that was like raising the fkn titanic but i got it up and sealed only a temp bodge tho until i can get a new wheel set 2 new tyres and a boost pump.

bar frame motor sus and brakes everything has been changed from stock lol :rolleyes:
 
Last edited:

Steve A

Esteemed Pedelecer
Aug 28, 2016
704
414
Ashford, UK
I've been using stans seal for near 8 years now on three different bikes and no issue. I think this is just bad luck :(. Saying that, on rare occasions i'll strip the tyre off, check tape etc. I always use stans rim tape and double over valve area, taking time when putting tape on to ensure no air bubbles.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
i never had rim tape and never really cleaned them out and just added more sealant when needed.

it took 4 years to cause the damage but it did not say to use rim tape with the rims i have as only 1 hole for the valve.

the mavics are the same but ill tape the valve hole just in case.

i can get a rim for £115 +pp+ £40 to build them up but it will cost more than there worth!.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
well got a reply ;)
Can you provide pictures of the issue?

Thanks,

Shawn VanEtten
Sales Coordinator-International & OEM
Stan's NoTubes
202 Daniel Zenker Dr
Big Flats, NY 14814
607-562-2877 x 215
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
Hi

Even with a sealed rim, we still suggest using tape on all rims to protect it. A small chip in the rim anodizing or paint exposing bare metal will cause corrosion with any liquid. Unfortunately there isn't anything I can do here as it isn't our rim.

Please reach out to Crank Brothers regarding this warranty.

Thanks,

Shawn VanEtten
Sales Coordinator-International & OEM
Stan's NoTubes
202 Daniel Zenker Dr
Big Flats, NY 14814
607-562-2877 x 215

non corrosive my ass he even said so why it say that on every bottle pmsl.
 
  • Like
Reactions: Fat Rat

soundwave

Esteemed Pedelecer
May 23, 2015
16,899
6,507
DSC_0181.JPG
DSC_0182.JPG


yodel left them in the fkn front garden! :eek:
 
Last edited:
  • Like
Reactions: robdon

Nealh

Esteemed Pedelecer
Aug 7, 2014
20,917
8,533
61
West Sx RH
Yodel :eek: :(, when it comes to home delivery they are SHE-ITE. They don't give a monkeys f**k about the parcel value or contents, just bung emby the door or close and sign the pda themselves with a scribble.
 

Related Articles

Advertisers