Hi
I have a D2S... keep getting E02 fault which points to the throttle. Bike wont move. I replace throttle still no joy.
The controller is wk3615ys and when measure power on throttle plug it was only showing 2.7-2.75 volts.
Can anyone confirm if this is correct or if it should be 5 volts.
I take it if its suppose to be 5 volts its the controller thats the issue.
Can it be repaired? Im ok at soldering and have a reflow station but would like to be sure its supposed to be 5 volts and what im looking for inside that may be the issue.
Thanks in advance.
I have a D2S... keep getting E02 fault which points to the throttle. Bike wont move. I replace throttle still no joy.
The controller is wk3615ys and when measure power on throttle plug it was only showing 2.7-2.75 volts.
Can anyone confirm if this is correct or if it should be 5 volts.
I take it if its suppose to be 5 volts its the controller thats the issue.
Can it be repaired? Im ok at soldering and have a reflow station but would like to be sure its supposed to be 5 volts and what im looking for inside that may be the issue.
Thanks in advance.