charging a battery help

guerney

Esteemed Pedelecer
Sep 7, 2021
11,341
3,220
How well protected are chargers from power surges? With all the storms and usual winter power outages recently, I bought a new power surge protector specifically for my ebike battery charger.
 

saneagle

Esteemed Pedelecer
Oct 10, 2010
6,785
3,132
Telford
I'm a lover not an electrician... but as I uderstand it, the ickle tiny traffic cop demons which live inside those funny shaped cylinders and boxes etc. on the board, slow down electron pixies travelling at 12V or faster from a power supply into one pair of connectors, to the set voltage speeds scrawled on the board, before they exit from the other pair of connectors on the other side. Those speeds have been measured by elite higher ranked traffic cop demons living in much more expensive and far more accurate measuring gizmos than I can afford. If you shove 12V in one end and don't get the scrawled voltages out, your meter is not accurate. Pixies which refuse to slow down are eaten by demon cops.
I don't think they did that at all. They just looked in the plug and saw that the fuse wasn't right. The rest of what they said was probably just conjecture based on the unused fuse not being right.
 

saneagle

Esteemed Pedelecer
Oct 10, 2010
6,785
3,132
Telford
How well protected are chargers from power surges? With all the storms and usual winter power outages recently, I bought a new power surge protector specifically for my ebike battery charger.
In the 10 years I've been on this forum, nobody ever reported that a storm killed their ebike charger. Ebike chargers have inductors and transformers in them, so have their own surge protection.
 

billyboya

Esteemed Pedelecer
Aug 10, 2016
1,136
90
73
uk
I'm a lover not an electrician... but as I uderstand it, the ickle tiny traffic cop demons which live inside those funny shaped cylinders and boxes etc. on the board, slow down electron pixies travelling at 12V or faster from a power supply into one pair of connectors, to the set voltage speeds scrawled on the board, before they exit from the other pair of connectors on the other side. Those speeds have been measured by elite higher ranked traffic cop demons living in much more expensive and far more accurate measuring gizmos than I can afford. If you shove 12V in one end and don't get the scrawled voltages out, your meter is not accurate. Pixies which refuse to slow down are eaten by demon cops.




I may open my charger up to look. How do I test for a fake fuse inside the charger?




This Grin dude says blade fuses don't always blow, causing problems. Three in series would increase the odds of one blowing:






Do BMS Battery ship from China?
Yes get your point, and yes my battery came from China. But I wasn’t gonna wait ages for a new charger
 

billyboya

Esteemed Pedelecer
Aug 10, 2016
1,136
90
73
uk
Well today I went for a short ride. Put battery on charge again. Never touched any leads on charger. And put on a multimeter when it was at 42.4v. The charger light went green automatically. So like you said saneagle my meter is reading a bit high. So now hopefully when meter says 42.4 volts the charger light should go green automatically.