Thanks for your advice going to try and remove it the now and see what happensProbably not very convenient to remove, but you could try removing it and putting it in a warm dry place for a day or so. (Of course you'll need to remove it anyway if you find a replacement.) Or even point a hair dryer at it (not too hot) for an hour or so. If it can open up that will help dry it out, and if its got a removable battery remove it.
God didn’t think it would turn out to be that big a job lol cheers for the advice greatly appreciatedIf you can’t dry it out and need to buy a new display then search for suntour oled display. But be warned they are horrendously expensive for what they are. There are several advertised but nobody appears to have any current stock.
SR Suntour CANBUS OLED display / Slim Design / for Suntour Canbus E25 motor ebikes
SR Suntour CANBUS OLED display / Slim Design / for Suntour Canbus E25 motor ebikes () EBDS20-OLED701-MPH-CAN-L500 OLEDscuffwheels.com
A cheaper and more versatile alternative would be to replace the display, controller and swap the torque sensor for a cadence sensor with a suitable KT combination, but you will have to do some rewiring and then recommission everything, which includes setting up the display parameters and it could also include some fault finding to get the motor to work.
So basically swap everything out except the battery and motor.
Mine if broken too. Cannot get a new on so not dire of any are compatibleI have a Carrera vengeance E bike & was undercover for a few months but checked it yesterday and the display is white with water drops under it! I can’t seem to find the right display for it ? Could anybody help on how much /where I could get a display ? View attachment 51005
What a rip-off. The Bafang SW102 one is only £40 and is identical apart from the firmware. Another reason not to buy one of those bikes.SR Suntour CANBUS OLED display / Slim Design / for Suntour Canbus E25 motor ebikes
SR Suntour CANBUS OLED display / Slim Design / for Suntour Canbus E25 motor ebikes () EBDS20-OLED701-MPH-CAN-L500 OLEDscuffwheels.com
Can this work with the vengeanceWhat a rip-off. The Bafang SW102 one is only £40 and is identical apart from the firmware. Another reason not to buy one of those bikes.
I don't think so, but I have never tried it.Can this work with the vengeance
I bought a bafang CAN screen hoping it'd work, but there seems to be custom firmware on the stock one, meaning a generic bafang one will not workCan this work with the vengeance
I have a Carrera vengeance E bike & was undercover for a few months but checked it yesterday and the display is white with water drops under it! I can’t seem to find the right display for it ? Could anybody help on how much /where I could get a display ? View attachment 51005
What a rip-off. The Bafang SW102 one is only £40 and is identical apart from the firmware. Another reason not to buy one of those bikes.