Can I derestrict my 2016 Haibike Sduro Nduro for private Land use?
- Thread starter Tyler Durden
- Start date
Yes just glue a spare magnet onto the end of the pedal spindle and relocate the speed sensor from inside the chainstay to outside so the new magnet position activates it. Job done, this does mean your speedo won't work though and you can't just replace it with a wireless one as there is too much interference.
You can just use a gps speedo. I used my Garmin for awhile when I had my bike modded that way. Worked fine.
Now I decided to go with a dongle to derestrict it. I went with the Peartune dongle, the stock speedo functions perfectly with no issues and the bike looks stock. It's pretty fun.
Sent from my SM-G935V using Tapatalk
Now I decided to go with a dongle to derestrict it. I went with the Peartune dongle, the stock speedo functions perfectly with no issues and the bike looks stock. It's pretty fun.
Sent from my SM-G935V using Tapatalk
Not all dongles keep the speedo working correctly, most of them read ok up to a certain speed (below cutout) then they cancel every other or 2 out of 3 pulses so the speedo reads half or a third of the correct speed.
I purchased a Speedup Ribelle, from Italy. As it gives the correct speedo reading, and keeps the correct mileage on the Odometer. It can be turned on and off by a sort sequence of pressing walk and down buttons, and is hidden inside the motor cover.
http://speedup.altervista.org/speedup-ribelle-real-speed.html
I used Google chrome and Google translate, to understand what to order.
I've covered about 400 miles with SpeedUp fitted with no problems so far.
http://speedup.altervista.org/speedup-ribelle-real-speed.html
I used Google chrome and Google translate, to understand what to order.
I've covered about 400 miles with SpeedUp fitted with no problems so far.
D
Deleted member 4366
Guest
You can derestrict it for about £1
http://www.ebay.co.uk/itm/Sn74ls74-74Ls74-Flip-Flops-Dual-D-Type-5Pcs-Develope-New-Ic-Diy-M-/381611866513?hash=item58d9d6f991:g:p4sAAOSwcUBYHcOz
http://www.electronics-tutorials.ws/sequential/seq_4.html
5v connects to vcc; ground to GND; speed signal from your sensor to CLK; Q is the signal output to your motor; join D to Q with a line over it, like in the diagram. Alternatively, you can pay £125 or more for a ready made one.
why dont you make some up and offer them for sale for 25 quid a popYou can derestrict it for about £1
http://www.ebay.co.uk/itm/Sn74ls74-...866513?hash=item58d9d6f991:g4sAAOSwcUBYHcOz
http://www.electronics-tutorials.ws/sequential/seq_4.html
5v connects to vcc; ground to GND; speed signal from your sensor to CLK; Q is the signal output to your motor; join D to Q with a line over it, like in the diagram. Alternatively, you can pay £125 or more for a ready made one.
How does this solution effect the read outs on the trip computer?
Sent from my LG-H850 using Tapatalk
